High-Solvency Methyl Acetate Solvent: Eco-Friendly Alternative to Acetone Methyl acetate (CAS 79-20-9; EC 201-185-2) is a saturated aliphatic ester with molecular formula CH3COOCH3 and molar mass 74.08 g/mol. Neat solvent quality is commonly controlled by gas chromatographic assay above 99.5 wt%, with water content below 0.05 wt% per ASTM D1364...
Factory Direct Methyl Acetate: Contract & Liability Comparison vs Trader Supply Methyl acetate (CAS 79-20-9, CH3COOCH3, molecular mass 74.08 g/mol) is classified as UN 1231, Class 3, Packing Group II, with closed-cup flash point −10 °C, boiling point 56.9 °C at 101.3 kPa, and vapor pressure 173 mm Hg at...
Methyl Acetate 99.5% Industrial Grade: Full Specification, COA and Solvency Data Pack defines the technical boundary conditions for a fast-evaporating ester solvent identified by CAS 79-20-9, EINECS 201-185-2, and UN 1231. The product is a single-component oxygenated solvent with molecular formula CH3COOCH3 and molecular weight 74.08 g/mol. Industrial-grade methyl acetate...
Buy Methyl Acetate in Bulk: Drum, IBC, Flexitank and ISO Tank Order Options are assessed below against the physical-property and regulatory profile of methyl acetate (CAS 79-20-9, EINECS 201-185-2, UN 1231, Class 3, Packing Group II). Methyl acetate is a saturated C3 ester, CH₃COOCH₃, with molar mass 74.08 g/mol, boiling...
Methyl acetate, CAS 79-20-9 and EC number 201-185-2, is supplied as a fast-evaporating ester solvent with a molecular weight of 74.08 g/mol, boiling point of 56.9 °C at 101.3 kPa, closed-cup flash point of -10 °C, and vapor pressure of 170 mm Hg at 20 °C. Commercial bulk specifications typically...
Methyl acetate solvent replacement support: formulation matching and trial pack qualification is organized around measured evaporation, solubility, and contamination boundaries rather than single-property drop-in assumptions. Methyl acetate is evaluated as a non-HAP, low-molar-mass ester with molar mass 74.08 g/mol, boiling point 56.9 °C at 101.3 kPa, density 0.932 g/cm³ at...
The Methyl Acetate Supply Programme: Annual Contract, Buffer Stock and Dual Source is intended for continuous manufacturing operations where this oxygenated solvent is consumed at rates above 500 metric tons per year and where supply interruption on a single coating line carries a measured downtime cost exceeding €2,000 per hour....
Regulatory-ready methyl acetate supply with a compliance pack and documentation assurance framework is specified when the ester is charged into processing lines subject to EU REACH Regulation (EC) No 1907/2006, EU CLP Regulation (EC) No 1272/2008, US TSCA inventory obligations, FDA indirect food-contact clearances where applicable, and ICH Q3C residual...
Procurement of methyl acetate for solvent blending, industrial cleaning, flexographic ink dilution, and polyurethane adhesive thinning requires a formal verification sequence before any advance payment or deposit is released. Methyl acetate (CAS 79-20-9, UN 1233, Class 3, PG II) is a fast-evaporating ester with a closed-cup flash point of −10...
Methyl Acetate Supplier Qualification Checklist: 12 Points Before Adding a Source is a structured verification sequence for a solvent whose transport, storage, and impurity profile are as decisive as its bulk purity. Methyl acetate, CH₃COOCH₃, CAS 79-20-9, is a Class 3 flammable liquid under UN 1231, boiling at 56.9 °C...
The assessment of methyl acetate procurement economics requires separation of the invoiced Free on Board price from the total outlay incurred when solvent reaches the consuming facility. Methyl acetate (CAS RN 79-20-9, UN 1231) is a Class 3 flammable liquid with a closed-cup flash point of -10°C determined by ASTM...
Methyl acetate sample requests for laboratory solvent evaluation or coating-process qualification are managed as hazardous materials from the point of fill. The substance is identified as CAS 79-20-9, UN 1231, Class 3, Packing Group II, with a closed-cup flash point of -10 °C and a vapour pressure of 23.2 kPa...
Methyl acetate (CAS 79-20-9, EC 201-185-2, molecular formula CH₃COOCH₃) is a low-boiling ester used as a solvent in coatings, adhesives, cleaning formulations, and as a chemical intermediate. The liquid has a closed-cup flash point of -10 °C, a boiling point of 56.9 °C at 101.3 kPa, and a liquid density...
Methyl Acetate Plant Audit: 8 On-Site Checks That Replace Factory Photos Static photographic records of methyl acetate production units fail to capture dynamic process variables such as transient pressure drop across reactive distillation packing, reboiler steam condensate conductivity, and mechanical seal barrier fluid pressure. An on-site audit verifies whether operating...
Methyl acetate (CAS 79-20-9) is a low-boiling carboxylate ester used in solvent-borne coatings, adhesive cleanup, precision cleaning, and acetylated resin processing. The product’s normal boiling point is 56.9 °C, its closed-cup flash point is −10 °C, and its transport classification is Class 3, UN 1231, packing group II. In procurement,...
Methyl Acetate Import Documentation Pack: What Every Shipment Needs Methyl acetate (CAS 79-20-9; EC 201-185-2) is consigned internationally as UN 1233, Class 3, Packing Group II. The product is a low-boiling methyl ester of acetic acid with a closed-cup flash point of -10 °C as determined by ASTM D56, a...
Loading Plan for Methyl Acetate: Drum Count, Flexitank and ISO Tank Payload Math Load planning for methyl acetate (CAS 79-20-9; UN 1231, Class 3, packing group II) is governed by density at 20 °C of 0.932 kg/L, a flash point of −10 °C, a boiling point of 56.9 °C, and...
Analysis of methyl acetate suppliers in China: capacity, feedstock integration and export ports requires separating merchant esterification from polyvinyl alcohol co-product supply. Methyl acetate (CAS 79-20-9, molecular weight 74.08 g/mol) is produced at integrated coal-to-methanol, coal-to-acetic acid, and polyvinyl alcohol complexes, as well as at standalone esterification units. The esterification...
Methyl acetate (CAS 79-20-9; EC 201-185-2; C3H6O2) is a fast-evaporating ester solvent used in coatings, adhesives, printing inks, nail-care preparations and industrial cleaning formulations. The following Methyl Acetate REACH & CLP Compliance: Classification, SDS and Labelling Checklist consolidates the classification, safety data sheet, label and packaging obligations under Regulation (EC)...
Methyl Acetate, UN 1231: Class 3 Packing Group II Transport and Compounding Controls The transport compliance envelope for Methyl Acetate UN 1231 Shipping: Class 3 Packing Group II Requirements is established by flash point, initial boiling point, and saturated vapor concentration, not by the final commercial formulation. Methyl acetate, CAS...
Methyl Acetate HS Code 2915.39: Correct Classification to Avoid Customs Delays Import entries for methyl acetate are held at the border when the declared subheading conflicts with the substance identity data shown on the safety data sheet and certificate of analysis. The correct Harmonized System subheading is 2915.39, covering other...
Is Methyl Acetate VOC Exempt? US, EU and China Regulatory Status Compared Methyl acetate (CAS 79-20-9) is a fast-evaporating ester solvent with a normal boiling point of 56.9 °C and a vapor pressure of approximately 23 kPa at 20 °C. The solvent is used in flexographic and gravure printing inks,...
Middle East & Southeast Asia Import Compliance for Methyl Acetate: GCC, SASO and Certificates requires a shipment-level documentation set that is not identical to a EU REACH or US TSCA file. Methyl acetate (CAS 79-20-9, UN 1231) is a Class 3 flammable liquid, Packing Group II, with a closed-cup flash...
Methyl acetate, CAS 79-20-9, is the methyl ester of acetic acid with the formula CH3COOCH3, molecular weight 74.08 g/mol, boiling point 57.1 °C, density 0.932 g/cm³ at 20 °C, and flash point approximately -10 °C. A methyl acetate technical data sheet cannot be read as a simple list of independent...
Methyl acetate (CAS 79-20-9, CH3COOCH3) functions as a fast-evaporating oxygenated solvent in nitrocellulose lacquers, flexographic and gravure printing inks, polyurethane topcoats, and high-solids industrial coatings. The compound has a molar mass of 74.08 g/mol, a boiling point of 56.9 °C at 101.3 kPa, a density of 0.932 g/cm³ at 20...
Within solvent-borne coating and printing operations, formulation chemists evaluate methyl acetate as a fast-evaporating ester when ethyl acetate or acetone becomes unavailable, off-spec, or subject to a local emission limit. Methyl acetate, CAS 79-20-9, is produced from methanol and acetic acid, with a boiling point of 56.9 °C, closed-cup flash...
Evaluating methyl acetate (CAS 79-20-9) against acetone, ethyl acetate, and methyl ethyl ketone on a per-litre purchase basis introduces a systematic economic bias in fast-dry coating operations. A solvent with a lower litre price but lower density may not reduce the mass of solvent purchased per dry film kilogram. A...
Methyl acetate (CAS 79-20-9, UN 1231) occupies a narrow but operationally demanding position in the Southeast Asian solvent import portfolio. The product is a fast-evaporating ester solvent with a closed-cup flash point of -13 °C, an initial boiling point of 56.9 °C, and a vapour pressure of approximately 23.1 kPa...
Methyl acetate supply into Middle Eastern blending, coating, and cleaning operations is typically specified as a 99.5 % minimum assay solvent, CAS 79-20-9, transported as UN 1231 under Class 3, Packing Group II. It has a flash point of -10 °C and an atmospheric boiling point of 57 °C, which...
The purchasing file for methyl acetate for EU buyers: CLP, VOC limits and supply checklist should link the harmonised CLP entry, the solvent emission accounting required under Directive 2004/42/EC, and the documented batch release checks needed before incoming tank or drum acceptance. Methyl acetate (CAS 79-20-9; EC 201-185-2; UN 1231)...
Methyl Acetate Wholesale & Volume Tiers: How Contract Sizing Works Industrial procurement of methyl acetate (CAS 79-20-9, CH3COOCH3, molecular weight 74.08 g/mol) does not follow a single flat price curve. The ester moves through volume-tier contracts that align production lot size, transport capacity, terminal storage, and analytical control. A buyer...
Methyl acetate, CAS 79-20-9, is a high-volatility acetate ester used as a non-HAP solvent in coating, adhesive, cleaning, and chemical intermediate operations. The product category identified as OEM & Private Label Methyl Acetate: Blends, Grades and Label Customisation covers specification-controlled solvent supplied under customer-specific grade codes, packaging formats, and regulatory...
ISO Tank vs Flexitank vs Drums for Methyl Acetate: Packaging Decision Tree Methyl acetate, CAS 79-20-9, is classified as UN 1231, Class 3, Packing Group II for modal transport. The packaging decision tree for this ester is not a cost-driven selection among interchangeable modes; it is controlled by vapour pressure,...
Methyl acetate (CAS 79-20-9) functions as a fast-evaporating active solvent in nitrocellulose lacquers, acrylic coatings, and low-HAP urethane reducers. As a carboxylate ester with a normal boiling point of 57.1 °C and a closed-cup flash point of approximately -10 °C (ASTM D56), it presents both a recovery opportunity and a...
Methyl acetate (CAS 79-20-9; EINECS 201-185-2) is the methyl ester of acetic acid with molecular formula C3H6O2 and molecular weight 74.08 g/mol. Commercial solvent grades are supplied at ≥99.5 wt% purity, with methanol ≤0.10 wt%, water ≤0.05 wt%, and acidity ≤0.01 wt% as acetic acid. The material is shipped in...
Order-to-Delivery Timeline for Methyl Acetate: A Transparent Process Map Procurement and supply-chain personnel evaluating methyl acetate (CAS 79-20-9) frequently encounter contradictory quoted lead times because the order-to-delivery sequence contains hidden technical gates that are rarely visible on a standard commercial tender. A transparent process map for methyl acetate includes order...
Methyl acetate (CAS 79-20-9; UN 1231) is a Class 3, Packing Group II flammable solvent with industrial-grade purity typically documented in certificates of analysis at ≥99.5 wt%, water content ≤0.05 wt%, acidity as acetic acid ≤0.01 wt%, and methanol ≤0.1 wt%. Its physical properties — molecular weight 74.08 g/mol, normal...
Methyl acetate CAS 79-20-9, also identified as methyl ethanoate or acetic acid methyl ester, is a carboxylate ester with molecular formula C₃H₆O₂ and molar mass 74.08 g/mol. Under CLP Regulation (EC) No 1272/2008, the substance carries H225, H319 and H336 hazard statements, with the signal word “Danger.” The closed-cup flash...
Material compatibility and storage for methyl acetate center on three interacting variables: hydrolysis, moisture ingress, and container choice. Methyl acetate (CH₃COOCH₃, CAS 79-20-9, UN 1231) is a low-boiling acetate ester with a closed-cup flash point of -10 °C, a normal boiling point of 57.1 °C, a density of 0.932 g/cm³...
Methyl acetate (CAS 79-20-9; CH3COOCH3; molar mass 74.08 g/mol) is a fast-evaporating carboxylate ester with a closed-cup flash point of -10 °C, a boiling point of 56.9 °C, and a density of 0.932 g/cm³ at 20 °C. It is used in coatings, adhesives, cleaning fluids, and two-component polyurethane processing. The...
Methyl acetate (CAS 79-20-9) is a saturated acyclic monocarboxylic acid ester imported into the United States as a low-boiling, non-HAP solvent and chemical intermediate. The phrase “Methyl Acetate in the US Market: Tariff, TSCA and Import Compliance” defines the operational boundary across three regimes: classification and duty assessment under the...
Methyl acetate (CAS 79-20-9, C3H6O2) is a fast-evaporating ester solvent used in flexographic inks, coil coatings, cosmetic nail polish removers, adhesives, and industrial cleaning formulations. It is manufactured predominantly by continuous esterification of methanol and acetic acid over an acid catalyst, followed by azeotropic separation or pressure-swing distillation. Supply security...
Methyl acetate (CAS 79-20-9) is a low-boiling ester solvent with molecular weight 74.08 g/mol, boiling point 56.9 °C, closed-cup flash point -10 °C, density approximately 0.932 g/cm³ at 20 °C, and vapour pressure 216 hPa at 20 °C. Under transport regulations it is classified as UN 1231, Class 3, Packing...
Methyl acetate (CH3COOCH3, CAS 79-20-9) is a low-molecular-weight ester with molecular weight 74.08 g/mol, boiling point 56.9 °C at 101.3 kPa, vapour pressure 217 hPa at 20 °C, closed-cup flash point -10 °C, auto-ignition temperature 455 °C, and flammable range 3.1–16 vol%. The vapour density relative to air is 2.55,...
Methyl acetate (CAS 79-20-9; EC 201-185-2; CH3COOCH3; relative molecular mass 74.08 g/mol) is a volatile acetate ester solvent with transport classification UN 1231, Class 3, Packing Group II. In Safety Data Sheet Section 2, the substance carries harmonized GHS codes H225, H319, and H336, with supplemental statement EUH066 under Annex...
Methyl acetate (CAS 79-20-9; methyl ethanoate) is a low-boiling ester with molecular weight 74.08 g mol⁻¹, boiling point 56.9 °C at 101.3 kPa, density 0.932 g cm⁻³ at 20 °C, and a closed-cup flash point near -10 °C. In food and flavour compounding, the food/flavour-grade boundary is not a single...
Methyl acetate, CAS 79-20-9, is a low-boiling ester solvent with a closed-cup flash point of −10 °C and a boiling point of 56.9 °C at 101.3 kPa. The liquid forms ignitable vapour-air mixtures at ordinary ambient temperatures. Under NFPA 30 the solvent is classified as a Class IB flammable liquid...
Methyl acetate, CH3COOCH3, is a low-boiling ester solvent with a normal boiling point of 57°C and a closed-cup flash point of -10°C. The analytical package for methyl acetate is represented by three linked methods: GC assay, Karl Fischer water, and ASTM acidity. These methods are operated as a single batch-release...
Methyl Acetate for Adhesives & Polyurethane Foaming: Grades and Impurity Control Industrial substitution of methyl ethyl ketone and methylene chloride in adhesive diluents and polyurethane foam processing has shifted attention to methyl acetate. The ester has a boiling point of 57.1 °C, a closed-cup flash point of -10 °C by...
Methyl Acetate in Electronics & Precision Cleaning: Rosin Flux Removal and Residue Control Methyl acetate is deployed in precision electronics cleaning as a fast-evaporating ester solvent for rosin flux removal and ionic residue control. The solvent has a closed-cup flash point of -10 °C, a normal boiling point of 56.9...
Methyl Acetate Grades Compared: Technical, High-Purity, Urethane and Food Grade Commercially supplied methyl acetate (CAS 79-20-9) is not a single solvent stream but a family of refinement-dependent products. The ester, C3H6O2, has molecular weight 74.08 g/mol, boiling point 56.9 °C at 101.3 kPa, density 0.933 g/cm³ at 20 °C, vapor...
Methyl Acetate vs Acetone: Which Fast-Evaporating Solvent Fits Your Line? Selection of a fast-evaporating solvent for coating, printing, cleaning, or extraction lines requires separate measurement of evaporation rate, solvency parameter, water interaction, electrical behavior, and regulatory status. Methyl acetate (79-20-9) and acetone (67-64-1) occupy the same rapid-evaporation segment of the...
The product methyl acetate, CAS 79-20-9, is compared against ethyl acetate, CAS 141-78-6, through the framework Methyl Acetate vs Ethyl Acetate: Compliance, Cost and Solvency Compared. Methyl acetate has a boiling point of 56.9 °C at 101.3 kPa, a density of 0.932 g/cm³ at 20 °C, a vapor pressure of...
Methyl acetate (CAS 79-20-9) is a carboxylate ester with a molecular weight of 74.08 g/mol, a boiling point of 56.9 °C at 101.325 kPa, a density of 0.932 g/cm³ at 20 °C, a closed-cup flash point of -10 °C, and a vapor pressure of 217 hPa at 20 °C. Commercial...
Commercial methyl acetate, CAS 79-20-9, is a low-boiling ester solvent with the formula CH3COOCH3 and a normal boiling point of 57 °C. The liquid density is 0.932 g/cm³ at 20 °C, and the material is classified as a flammable liquid under UN 1231, Class 3, Packing Group II. Production generally...
Methyl acetate (CAS 79-20-9, EC 201-185-2, UN 1231) is a saturated acyclic monoester with the formula CH₃COOCH₃ and a closed-cup flash point of −10 °C under ISO 3679:2015 or ASTM D56-21a. Under CLP Regulation (EC) No 1272/2008, Annex VI Table 3.1, the harmonised classification is Flam. Liq. 2 H225, Eye...
Third-Party Inspection for Methyl Acetate: COA, Retest and Dispute Resolution is implemented at solvent receiving terminals, coil-coating plants, and adhesive reactors where a single off-specification lot can alter the evaporation profile of a finished formulation. Methyl acetate (CAS 79-20-9) is a low-boiling oxygenated solvent with a normal boiling point of...
Industrial compliance for methyl acetate waste and emission management, covering VOC abatement and recycling obligations, begins with a narrow set of physical constants: closed-cup flash point -10°C under ASTM D56, atmospheric boiling point 56.9°C, vapour pressure 22.7 kPa at 20°C, molecular weight 74.08 g/mol, and lower explosive limit 3.1 vol%....
The hazard profile of methyl acetate, CAS 79-20-9, is often compressed into the question “Is Methyl Acetate Safe? Flammability, Toxicity and Real-World Risk Explained.” A technical assessment separates acute flammability, occupational exposure limits, and the specific process conditions that determine whether vapor concentrations remain controlled. Methyl acetate is a carboxylate...
Methyl Acetate in Artificial Leather, Textile and Perfume: Three Underused Uses Methyl acetate (CAS 79-20-9) is a low-molecular-weight methyl ester with a normal boiling point of 56.9 °C, a closed-cup flash point of -10 °C, and a dynamic viscosity of 0.381 mPa·s at 25 °C. Compared with ethyl acetate, the...
Within the C3 ester intermediate chain, methyl acetate is positioned as a chemical intermediate for methyl acetoacetate and downstream esters, not as a terminal solvent. The compound has a normal boiling point of 56.9 °C at 101.3 kPa, density of 0.933 g/cm³ at 20 °C measured by ASTM D4052-22, autoignition...
What Is Methyl Acetate (MeOAc)? Uses, Grades and How It Is Made Methyl acetate (MeOAc, CAS 79-20-9; EC 201-185-2) is a low-molecular-weight carboxylate ester with the formula CH3COOCH3. At 101.3 kPa the substance boils at 56.9 °C and freezes at -98.0 °C; its closed-cup flash point is -10 °C under...
Methyl acetate (CAS 79-20-9; CH3COOCH3) is a low-molecular-weight ester solvent with a boiling point of 56.9 °C, a closed-cup flash point of −10 °C, and a vapour pressure of 21.7 kPa at 20 °C. Under US EPA 40 CFR 51.100(s), methyl acetate is classified as a VOC-exempt compound; under CLP/GHS,...
Methyl Acetate Market Snapshot: Capacity, Feedstock and Coating Demand Trends Methyl acetate (CAS 79-20-9, CH₃COOCH₃, molar mass 74.08 g/mol) is an industrial ester solvent and chemical intermediate whose market balance reflects three distinct supply channels: merchant esterification of methanol and acetic acid, polyvinyl alcohol co-product recovery, and coal-derived carbonylation intermediates....
