Plant-based and petro-based epichlorohydrin (ECH) remain chemically identical as an epoxy resin feedstock: the molecule is 1,2-epoxy-3-chloropropane, CAS 106-89-8, molecular weight 92.52 g/mol, boiling point 116.1°C at 101.3 kPa, and density 1.18 g/cm³ at 20°C. The distinction between glycerol-derived and propylene-derived ECH is therefore expressed in renewable carbon fraction, trace...
Epichlorohydrin (ECH, CAS 106-89-8) is a chlorinated oxirane monomer with a molecular weight of 92.52 g/mol, a boiling range of 115–117 °C at 101.3 kPa, a closed-cup flash point of 31 °C, and a vapor pressure near 1.7 kPa at 20 °C. Under Regulation (EC) No 1272/2008, the harmonized classification...
Epichlorohydrin Exporter Capability Sheet: What Export Documents Prove Real Capacity Epichlorohydrin (ECH, CAS 106-89-8) enters export markets as a chlorinated epoxide intermediate with a molar mass of 92.52 g/mol, a normal boiling point of 116.1 °C, and a closed-cup flash point near 31 °C under ISO 2719. Its principal downstream...
Private Label & Custom Spec Epichlorohydrin: OEM Specification Sheet for Distributors. Epichlorohydrin (ECH, CAS 106-89-8) is a chlorinated oxirane intermediate with a molecular mass of 92.52 g mol⁻¹, a normal boiling point of 115.2 °C, and a closed-cup flash point of 31 °C. Distributor private-label programs do not reformulate ECH;...
Epichlorohydrin (ECH, CAS 106-89-8) is transported as UN 2023, a Class 3 flammable liquid with a Class 6.1 toxic subsidiary and packing group II. The loading calculation for Epichlorohydrin containers and ISO tanks determines net weight from the calibrated volume, regulatory filling degree at 15 °C, and the density of...
Epichlorohydrin (ECH) Sample Shipment Compliance: Documents, Packaging & Lead Time Epichlorohydrin (CAS 106-89-8) is a chlorinated epoxide with molecular weight 92.52 g/mol, boiling point 116 °C, density 1.18 g/cm³ at 20 °C, and closed-cup flash point near 31 °C. Transport classification is UN 2023, Class 6.1 toxic liquid, PG II,...
A cargo of epichlorohydrin (ECH, CAS 106-89-8) is a colourless liquid, but its transaction value is not a physical constant. A buyer who stores a spot quote as a permanent number is anchoring capital to a figure that expires with the next feedstock settlement, energy price change, freight adjustment, or...
Epichlorohydrin (ECH) Supply: Grades, Specs, UN 2023 Logistics and Instant Quote Epichlorohydrin (ECH, CAS 106-89-8; molar mass 92.52 g/mol) is a chlorinated epoxide monomer supplied as a low-viscosity liquid with a closed-cup flash point of 31°C and a normal boiling point range of 115–117°C. The material is classified as UN...
Epichlorohydrin (ECH, CAS 106-89-8) is a chlorinated oxirane monomer used in liquid and solid epoxy resins, epichlorohydrin elastomers, wet-strength polyamide resins, and glycidyl ether intermediates. The epichlorohydrin grade selector—matching purity and water specification to the resin process—requires separate evaluation of three analytical domains: bulk purity by gas chromatography, water content...
Commercial supply inquiries for epichlorohydrin (CAS 106-89-8) frequently under-specify the variables that determine a binding price. Epichlorohydrin is a strained oxirane intermediate with a pendant chlorine; industrial use spans epoxy resins, synthetic glycerol, polyamide-epichlorohydrin wet-strength resins, epichlorohydrin elastomers, and pharmaceutical intermediates. A single nominal purity value does not define a...
Epichlorohydrin Total Landed Cost Calculator: From FOB to Your Plant Epichlorohydrin, commonly identified as ECH, is assigned CAS 106-89-8 and is a chlorinated liquid epoxide with molecular mass 92.52 g/mol, boiling point 115°C at 101.3 kPa, and density near 1.181 g/cm³ at 20°C. The total landed cost model for ECH...
Epichlorohydrin Manufacturer vs Trading Company: How to Verify Before You Wire a Deposit Most prepayment losses in epichlorohydrin (ECH, CAS 106-89-8) procurement arise when a trading company presents itself as a primary manufacturer and the purchasing organization relies on a certificate of analysis that cannot be traced to reactor-level process...
Epichlorohydrin Factory Audit Checklist: 22 Points for an ECH & Epoxy Resin Plant An integrated epichlorohydrin (ECH) and epoxy resin plant is audited as a single reactive-hazards system, not as two separate production departments. The initial inspection pass starts at the storage and utility interfaces because ECH is a Class...
Epichlorohydrin (ECH) is a chlorinated oxirane monomer with the molecular formula C3H5ClO and a normal boiling point of 116–118 °C. Two dominant production chemistries—allyl chloride epoxidation and glycerol hydrochlorination—generate crude ECH streams containing allyl chloride, 1,2-dichloropropane, 2,3-dichloropropene, and higher chlorinated propanes. Distillation separates these species, yielding the commercial grades that...
Epichlorohydrin Supplier Verification: 7 Public Records That Confirm a Real Factory Epichlorohydrin (ECH, CAS 106-89-8, EC 203-439-8) is a chlorinated monomer with molecular weight 92.52 g/mol, boiling point 116.1 °C at 101.3 kPa, and density 1.18 g/cm³ at 20 °C. The substance is consumed in the synthesis of liquid and...
Epichlorohydrin Supplier vs Manufacturer: A Sourcing Framework for Resin Producers Epichlorohydrin (ECH), CAS 106-89-8, molecular weight 92.52 g/mol, functions as the oxirane-functional monomer in the alkaline condensation that forms bisphenol-A diglycidyl ether (DGEBA) and epoxy novolac resins. For a resin producer, the sourcing decision is not an interchangeable commodity purchase;...
Direct procurement of epichlorohydrin (ECH, CAS 106-89-8) requires alignment between product quality, dangerous-goods logistics, and commercial transfer points that differ substantially from standard chemical distribution. With a molecular weight of 92.52 g/mol, a closed-cup flash point of approximately 31 °C, vapour pressure of 1.7 kPa at 20 °C, and density...
Epichlorohydrin (ECH, CAS 106-89-8) is a bifunctional monomer carrying an epoxide ring and a reactive chloromethyl substituent. It is consumed as the principal raw material in bisphenol A diglycidyl ether epoxy resins, epichlorohydrin elastomers, wet-strength resins for paper, and glycidyl ether derivatives. A first-shipment certificate pack for ECH is not...
Epichlorohydrin (ECH) is the difunctional oxirane intermediate used in the synthesis of liquid bisphenol A diglycidyl ether resins, epichlorohydrin elastomers, polyamide wet-strength additives, synthetic glycerol, and cationic surfactants. When a force majeure at a propylene-based allyl chloride plant or a glycerol feedstock disturbance removes a qualified ECH source, resin manufacturers...
Epichlorohydrin (ECH, CAS 106-89-8, EC 203-439-8) is transported as UN 2023, a Class 6.1/3 flammable toxic liquid with a closed-cup flash point near 33 °C and a boiling range of 115–117 °C. The material is a chlorinated oxirane monomer used primarily in liquid epoxy resin synthesis through condensation with bisphenol...
Epichlorohydrin (ECH), CAS 106-89-8, is a chlorinated epoxide intermediate with a normal boiling range of 115–117 °C, a density of 1.18 g/cm³ at 20 °C, and a flash point near 31 °C closed cup. Industrial production follows either the propylene-based allyl chloride route or the glycerin-based dichloropropanol route; both generate...
Epichlorohydrin Technical Support & After-Sales Service: What's Included covers the full handling chain for Epichlorohydrin (ECH, CAS 106-89-8, EC 203-439-8), a chlorinated epoxide intermediate with a molecular mass of 92.52 g/mol and a normal boiling range of 115–118 °C at 101.3 kPa. The support scope is defined for polymer-grade ECH...
This pre-order FAQ for Epichlorohydrin (ECH, CAS 106-89-8) covers MOQ, lead time, payment, sampling, and dangerous goods handling. ECH is a chlorinated oxirane liquid with the empirical formula C₃H₅ClO and molecular mass 92.52 g/mol. At 20 °C, its density is 1.180–1.183 g/cm³ when determined under ASTM D4052. The material is...
Epichlorohydrin (ECH; CAS 106-89-8) is a chlorinated oxirane intermediate with a molar mass of 92.52 g/mol, a flash point near 31 °C, and a transport classification under UN 2023. Its largest downstream route is the formation of bisphenol A diglycidyl ether for liquid epoxy resins, followed by epichlorohydrin elastomers, polyamide...
Epichlorohydrin (CAS 106-89-8, molar mass 92.52 g/mol) is a bifunctional epoxide intermediate used in liquid epoxy resin production, epichlorohydrin elastomers, polyamide wet-strength resins for paper, water-treatment polymers, and glycidyl ether synthesis. Continuous-process buyers in epoxy resin and wet-strength resin manufacturing require lot-to-lot stability rather than spot-market availability because drift in...
An Epichlorohydrin supplier in China for EU & ASEAN buyers: port, Incoterm and lead-time map is built around the transport class and storage temperature constraints of the liquid rather than the nearest seaport. The product is a chlorinated epoxide with a boiling range of 115–117 °C under ASTM D1078, a...
Epichlorohydrin (ECH, CAS 106-89-8) and propylene oxide (PO, CAS 75-56-9) are commercially important oxirane monomers used in ring-opening chemistry, but substitution of the methyl group in PO by a chloromethyl group in ECH changes kinematic, toxicological and process-safety behaviour. At 20 °C, ECH is a dense liquid with molecular weight...
Epichlorohydrin (ECH; CAS 106-89-8; C3H5ClO; molar mass 92.52 g/mol; boiling point 116.1 °C at 101.3 kPa; flash point 33 °C closed cup) is produced by three industrial routes: propylene via allyl chloride, glycerol via dichloropropanol, and propylene via allyl acetate/allyl alcohol. The epoxide ring and chloromethyl substituent create a bifunctional...
Epichlorohydrin for Epoxy Resins: Grade Selection for BPA-Type and Novolac Systems Epichlorohydrin (ECH, 1-chloro-2,3-epoxypropane) is the primary glycidylating reagent for liquid and solid bisphenol A-type epoxy resins and for epoxidized phenol-novolac resins. The molecular mass is 92.53 g/mol, the boiling point at atmospheric pressure is 116.1 °C at 101.3 kPa,...
Epichlorohydrin (ECH) Supplier Qualification: 12 Documents That Separate a Manufacturer from a Trader Epichlorohydrin (CAS 106-89-8), normal boiling point 115–116 °C at 101.3 kPa, is a chlorinated epoxide intermediate produced either by propylene-based allyl chloride chlorohydration or by glycerol hydrochlorination. The epoxide ring and chloromethyl substituent make ECH the reactive...
Epichlorohydrin Water & Acidity Control: Why ppm Matters in Epoxide Handling Commercial epichlorohydrin (ECH, CAS 106-89-8) is typically traded at purities above 99.9 wt%, yet the specification tests that most directly govern oxirane-handling performance are not the bulk assay but the residual water and acidity values expressed in mg/kg. The...
Epichlorohydrin (ECH) is identified by CAS 106-89-8, UN 2023, Class 6.1, Packing Group II, a closed-cup flash point of 31 °C by ASTM D56, a boiling range of 115–117 °C, density of 1.180–1.183 g/cm³ at 20 °C, and a lower flammable limit of 3.8 vol% in air. The product is...
EU REACH Compliance Checklist for Epichlorohydrin Imports: Annex XVII & TARIC Y-Codes Import control for epichlorohydrin (ECH; CAS 106-89-8; EC 203-439-8; CLP Annex VI index 603-026-00-6) begins with the harmonised classification under Regulation (EC) No 1272/2008. The substance is listed as Flam. Liq. 3 H226, Acute Tox. 3 H331, H311,...
Epichlorohydrin Occupational Exposure Limits: OSHA, ACGIH, NIOSH and China PC-TWA Compared Epichlorohydrin (ECH) (CAS 106-89-8), also designated 1-chloro-2,3-epoxypropane, is a chlorinated oxirane with a molecular weight of 92.52 g/mol, a boiling range of 115–116 °C, a closed-cup flash point of 33 °C, and a vapour pressure of 1.6 kPa at...
Epichlorohydrin (1-chloro-2,3-epoxypropane; CAS 106-89-8) moves through bulk and packaged supply chains as UN 2023, Class 6.1 (3), PG II. The same entry appears in ADR Table A, RID Table A, ADN Table A, the IMDG Code Dangerous Goods List, ICAO Doc 9284, and 49 CFR §172.101; the classification is therefore...
Epichlorohydrin Import Duty & HS Code Guide: 2910.30 Across EU, ASEAN and China defines the customs classification and tariff treatment of epichlorohydrin (ECH, CAS 106-89-8, EC 203-439-8), chemically identified as 1-chloro-2,3-epoxypropane. Under the WCO Harmonized System the substance is classified in heading 2910, subheading 2910.30. The heading covers epoxides, epoxyalcohols,...
Epichlorohydrin (ECH, 1-chloro-2,3-epoxypropane; CAS 106-89-8; EC 203-439-8; CN code 2910 30 00) enters the EU as a bulk liquid intermediate for epoxy resin synthesis, epichlorohydrin elastomer production, and wet-strength resin chemistry. Under the harmonised classification in Annex VI Part 3 of Regulation (EC) No 1272/2008 (CLP), index number 603-026-00-6, ECH...
Epichlorohydrin China Export Compliance: Terminal Inspection & DG Documentation Epichlorohydrin (ECH, CAS 106-89-8, C3H5ClO, molar mass 92.52 g/mol) is a chlorinated epoxide that demands terminal inspection discipline and dangerous goods documentation accuracy before export from China. The substance is a clear liquid at ambient temperature, with density 1.18 g/cm³ at...
Epichlorohydrin (ECH; CAS 106-89-8; 2-(chloromethyl)oxirane; molar mass 92.52 g mol−1) is a bifunctional epoxide monomer used in liquid and solid epoxy resins, polyepichlorohydrin elastomers, epichlorohydrin-ethylene oxide copolymers, polyamide wet-strength resins, and cationic polyacrylamides. The product specification for ECH is not a single assay value but an impurity profile centered on...
The sourcing phrase Epichlorohydrin vs Glycidol vs Glycidyl Ethers: Don't Source the Wrong One maps to three different epoxide chemistries, not three interchangeable solvent grades. Epichlorohydrin (ECH, CAS 106-89-8) is 2-(chloromethyl)oxirane with a molar mass of 92.52 g/mol and a theoretical epoxide equivalent weight of 92.52 g/eq. Glycidol (CAS 556-52-5)...
Epichlorohydrin (ECH; CAS 106-89-8; UN 2023) is a chlorinated epoxide with a closed-cup flash point of 31 °C, a normal boiling point of 116 °C, a density of 1.18 g/cm³ at 20 °C, and a vapour pressure near 1.77 kPa at 20 °C. It is assigned to Class 6.1 toxic...
Epichlorohydrin (1-chloro-2,3-epoxypropane, CAS 106-89-8) is a chlorinated alkylene oxide carrying both an epoxide ring and a terminal chlorine substituent. The monomer is consumed predominantly in liquid epoxy resin synthesis, with additional demand from epichlorohydrin elastomers, wet-strength paper resins, synthetic glycerin, and quaternary ammonium flocculants. The transport classification under UN 2023...
Epichlorohydrin (1-chloro-2,3-epoxypropane, CAS 106-89-8, EC 203-439-8) is listed on Annex XIV of Regulation (EC) No 1907/2006 as a substance of very high concern identified under Article 57(a) for its harmonised classification as carcinogen category 1B under Regulation (EC) No 1272/2008. Annex XIV listing triggers the authorisation obligation in Article 56(1),...
Epichlorohydrin (ECH, CAS 106-89-8, 2-(chloromethyl)oxirane, molecular formula C3H5ClO, molar mass 92.52 g/mol) is supplied as a clear-to-pale liquid with density 1.18 g/cm³ at 20 °C, normal boiling point 116.1 °C, closed-cup flash point 31 °C by EN ISO 3679:2015, and vapor pressure 1.66 kPa at 20 °C. Commercial solvent-free material...
Epichlorohydrin (ECH, CAS 106-89-8) is a chlorinated bifunctional monomer carrying an oxirane ring and a primary chloride substituent. The molar mass of 92.52 g/mol and theoretical epoxide equivalent weight of 92.52 g/eq make it the principal glycidylating agent in bisphenol-A epoxy resin manufacture. Commercial ECH is a mobile, chlorinated liquid...
Epichlorohydrin for Synthetic Glycerol & Glycidol: Selection and Route Options Epichlorohydrin (ECH; C₃H₅ClO; CAS 106-89-8; boiling point 116.1 °C at 101.3 kPa; density 1.180 g/cm³ at 20 °C; epoxide equivalent mass 92.52 g/mol) functions as a bifunctional alkylating intermediate for synthetic glycerol and glycidol. Selection between direct alkaline hydrolysis and...
The classification phrase “Epichlorohydrin Producer vs Manufacturer: Why the Distinction Changes Your Supply Risk” identifies a material boundary in supply-chain responsibility. Epichlorohydrin, CAS 106-89-8, with molar mass 92.52 g/mol, normal boiling point 116.1 °C, and density 1.18 g/cm³ at 20 °C, is a chlorinated epoxide used as a bifunctional intermediate...
In the epichlorohydrin (ECH, CAS 106-89-8) spot market, a plant turnaround announcement is often read as a binary event: the unit is either running or down. Supply stability, however, is not a switch. It is a sequence of upstream chlor-alkali balances, maintenance critical paths, restart quality recovery, and buyer-side storage...
Epichlorohydrin downstream map: epoxy resin vs synthetic glycerol demand split is an operational variable in chlor-alkali and C3 derivative planning. Epichlorohydrin, CAS 106-89-8, is manufactured by dehydrochlorination of dichloropropanol. In the dominant allyl chloride route, dichloropropanol is obtained from propylene via allyl chloride hypochlorination; in the glycerin route, it is...
`Epichlorohydrin in Water Treatment Resins & Paper Chemicals: Sourcing Logic is governed less by commodity price than by the propagation of trace chlorinated propanols and water into finished cationic polymers. Epichlorohydrin (ECH; CAS 106-89-8) functions as a bifunctional epoxide with a normal boiling point of 116.11 °C, a density of...
Importing Epichlorohydrin (ECH, CAS 106-89-8) into ASEAN & RCEP markets under the tariff paths and local permits framework requires parallel control of trade classification and hazardous-material handling. ECH, 1-chloro-2,3-epoxypropane, is supplied as a distillate with a minimum assay of 99.9 %, water content below 0.02 %, and APHA colour below...
Epichlorohydrin Mill & Plant Capability: Reading Capacity and Outage Signals requires the separation of nameplate capacity from demonstrated hourly mass production. Commercial ECH is routinely specified at 99.9 wt% minimum purity, with water content below 0.01 wt% and density of 1.18 g/cm³ at 20 °C when measured by ASTM D4052-22....
Epichlorohydrin (ECH, CAS 106-89-8) is a bifunctional chlorinated epoxide with molecular weight 92.52 g/mol, boiling point 116 °C–118 °C, density 1.18 g/cm³ at 20 °C, and closed-cup flash point 31 °C–33 °C. The product is classified under GHS CLP as Flam. Liq. 3 H226, Acute Tox. 3 H331/H311/H301, Skin Corr....
Reading Section 3 of an epichlorohydrin safety data sheet requires separating three distinct regulatory functions: the chemical identity disclosure, the concentration range that triggers mixture classification, and the embedded hazard category that carries through to Section 2. For 1-chloro-2,3-epoxypropane, CAS 106-89-8, EC 203-439-8, Annex VI index 603-026-00-6, the carcinogen declaration...
Epichlorohydrin Handling FAQ: Storage, Incompatibilities and First Aid Epichlorohydrin (CAS 106-89-8), also referenced as 1-chloro-2,3-epoxypropane, is a chlorinated oxirane intermediate used in epoxy resin synthesis, polyamide-epichlorohydrin wet-strength resins, synthetic glycerin, and elastomer modifiers. The liquid has a molecular mass of 92.52 g/mol, liquid density of 1.18 g/cm³ at 20°C, boiling...
Epichlorohydrin Alternatives & Bio-Based Glycerol Route Trade-offs are evaluated through feedstock chloride efficiency, chlorohydrin selectivity, and downstream epoxy resin equivalency. The conventional propylene-based route proceeds via allyl chloride generation at 480-510 °C, hypochlorous acid addition to dichloropropanols, and alkaline dehydrochlorination with Ca(OH)2 or NaOH. The bio-based glycerol route replaces propylene...
Epichlorohydrin (ECH), CAS 106-89-8, is the bifunctional epoxide intermediate responsible for the commercial epichlorohydrin elastomer family and the majority of liquid epoxy resins used in bonding and protective film applications. In chlorohydrin rubber, ECH polymerizes through the epoxide ring to form a polyether backbone that retains a chloromethyl substituent on...
Across epoxy resin, elastomer, and water treatment supply chains, bio-attributed epichlorohydrin (ECH) is a mass-balance output, not a chemically distinguishable molecule. The material retains CAS 106-89-8, density 1.18 g/cm³ at 20°C, boiling point 116°C, and flash point 31°C closed cup. A certificate issued under ISCC PLUS 3.4 for a bio-attributed...
What Drives Epichlorohydrin Cost: Glycerol, Propylene and the Route Switch Across epoxy resin, epichlorohydrin rubber, synthetic glycerin and wet-strength resin supply chains, the delivered cost of epichlorohydrin is not set by a single raw material but by the interplay among propylene valuation, chlorine and hydrogen chloride balance, caustic soda demand...
Epichlorohydrin (ECH; CAS 106-89-8, HS 2910.30) is a chlorinated propylene oxide with a molecular weight of 92.52 g/mol, a normal boiling point of 116.1 °C at 101.3 kPa, and a liquid density of 1.18 g/cm³ at 20 °C. ECH is miscible with most organic solvents and has a water solubility...
Epichlorohydrin (CAS 106-89-8) is a chlorinated C3 oxirane intermediate with a molecular weight of 92.52 g mol⁻¹, a normal boiling point of 116.1 °C, and a closed-cup flash point below 31 °C. More than 80% of global output is consumed in liquid epoxy resin synthesis, where ECH is condensed with...
Epichlorohydrin Market Brief: Capacity Expansion, Operating Rates and Route Shift. Epichlorohydrin (ECH, CAS 106-89-8) is a colorless liquid with molecular weight 92.52 g/mol, boiling point 116 °C, and density 1.18 g/cm³ at 20 °C. The commercial supply pool is divided principally between propylene-based chlorohydrin units and glycerol hydrochlorination units, with...
Epichlorohydrin Plant Turnaround Calendar: Reading Supply Gaps Before They Happen—this operational discipline rests on tracking maintenance constraints in chlor-alkali, allyl chloride, and glycerin hydrochlorination units, because published ECH nameplate capacity rarely describes physically available supply. Epichlorohydrin (CAS 106-89-8, C3H5ClO, molar mass 92.52 g/mol) is a volatile epoxide with normal boiling...
