2-Propanol, systematically propan-2-ol and commonly supplied as Isopropanol (IPA) 99.9% Anhydrous for electronics cleaning and medical-grade applications, is a secondary alcohol with the molecular formula C3H8O and molar mass 60.10 g/mol. The anhydrous grade has a normal boiling point of 82.5 °C, closed-cup flash point 11.7 °C, vapor pressure at...
2-Propanol (CAS 67-63-0) is a volatile secondary alcohol with formula C3H8O, relative molecular mass 60.10 g/mol, normal boiling point 82.3 °C, and closed-cup flash point 12 °C. At 20 °C, density is 0.786 g/cm³, viscosity is 2.04 mPa·s, vapor pressure is 4.4 kPa, and refractive index is 1.3776. The lower...
Global IPA Capacity Pipeline to 2031: China Surplus, India Import Substitution and the Electronic-Grade Race 2-Propanol (CAS 67-63-0), commonly identified as isopropanol or IPA, is a branched secondary alcohol with a normal boiling point of 82.5 °C, a closed-cup flash point of 11.7 °C, a vapor pressure of 4.4 kPa...
2-Propanol (CAS 67-63-0, propan-2-ol, isopropanol) is produced as an anhydrous or azeotropic C3 oxygenated solvent with a boiling point of 82.4 °C at 101.3 kPa and a closed-cup flash point of 11.7 °C. Commercial release is typically assessed under ASTM D770, with density measured by ASTM D4052 at 20 °C...
Contract pricing for 2-propanol (CAS Registry Number 67-63-0) is a direct reflection of upstream feedstock selection rather than an isolated solvent market. The molecule has a relative molecular mass of 60.10 g/mol, a normal boiling point of 82.3 °C at 101.3 kPa, and a closed-cup flash point of 11.7 °C....
2-Propanol (isopropanol; CAS 67-63-0; HS 2905.12) is a water-white secondary alcohol with a closed-cup flash point of 11.7 °C, a boiling point of 82.6 °C, a density of 0.786 g/cm³ at 20 °C, and a vapour pressure of 4.4 kPa at 20 °C. The material is classified as UN 1219,...
Why Two-Thirds of Chinese IPA Plants Were Under Water in 2026: Acetone Route vs Propylene Route Economics 2-Propanol (IUPAC propan-2-ol; CAS 67-63-0; commonly isopropanol or IPA) is a C3 secondary alcohol used as a solvent in coatings, printing inks, disinfectants, and electronics cleaning, and as a chemical intermediate for isopropyl...
What Is Isopropyl Alcohol? Grades, CAS 67-63-0 and the Names Buyers Actually Use 2-Propanol, the secondary alcohol registered under CAS 67-63-0 and EINECS 200-661-7, is sold under the IUPAC name propan-2-ol and the industrial synonyms isopropanol, isopropyl alcohol, IPA, dimethyl carbinol, and sec-propyl alcohol. At 101.325 kPa, the neat material...
The designation IPA vs Isopropanol vs 2-Propanol vs Isopropyl Alcohol: One Substance, Four Names identifies a single secondary alcohol with molecular formula C3H8O, molar mass 60.10 g/mol, CAS Registry Number 67-63-0, EC Number 200-661-7, and transport identifier UN 1219. The preferred IUPAC name is propan-2-ol; 2-propanol is retained in older...
Is Rubbing Alcohol the Same as Isopropyl Alcohol? The USP Monographs Explain the Trap 2-Propanol (CAS 67-63-0; C3H8O; molar mass 60.10 g/mol) is a volatile, flammable secondary alcohol encountered under the synonyms isopropanol and isopropyl alcohol. The recurring query, “Is Rubbing Alcohol the Same as Isopropyl Alcohol? The USP Monographs...
How Isopropyl Alcohol Is Made: Direct Hydration, Indirect Hydration and Acetone Hydrogenation 2-Propanol (CAS 67-63-0), also referred to as isopropyl alcohol, is a secondary alcohol with a molecular weight of 60.10 g/mol, a normal boiling point of 82.5 °C at 101.325 kPa, and a closed-cup flash point of 12 °C....
IPA Across Industries: A Volume Split Map from Coatings to Wafer Cleaning Commercial 2-propanol is distributed as 70%, 91%, 99%, and anhydrous material, with assay and water limits controlled by ASTM D770 for industrial grades and by SEMI C21 for electronic-grade supply. The physical envelope—closed-cup flash point 11.7 °C (ASTM...
2-Propanol (CAS 67-63-0), also referred to as isopropyl alcohol or IPA, is a branched C3 alcohol with molecular weight 60.10 g/mol, boiling point 82.6°C at 101.3 kPa, and closed-cup flash point 11.7°C. The product is manufactured commercially by direct hydration of propene with acid catalysts or by indirect hydration through...
Electronic-grade 2-propanol (CAS 67-63-0) is a five-tier contamination hierarchy rather than a single solvent. The designation electronic grade IPA: SEMI G1 to G5, metal limits and what each grade actually cleans is governed by residual metal concentration, water content, nonvolatile residue, and particle load. The solvent matrix itself remains 2-propanol...
Technical-grade 2-propanol (isopropanol, IPA; CAS 67-63-0) is a volatile, water-miscible oxygenated solvent with a normal boiling point of 82.3 °C, a closed-cup flash point of 12 °C, and density of 0.785 g/cm³ at 20 °C. The product enters downstream operations through carbon steel or stainless steel bulk storage fitted with...
Isopropyl alcohol (2-propanol; CAS 67-63-0; EC 200-661-7) is a branched C3 secondary alcohol with a closed-cup flash point of approximately 12 °C and a vapor pressure of 4.4 kPa at 20 °C for the anhydrous material. The commercial concentrations 70% v/v, 91% v/v, and 99% v/v are not interchangeable for...
Anhydrous IPA: Water Content Limits, Karl Fischer Methods and Why 0.2% Is Not Enough Anhydrous 2-propanol, also designated isopropyl alcohol, IPA, or isopropanol, CAS 67-63-0, is a hygroscopic polar solvent used in reagent-grade, analytical, electrochemical, and moisture-sensitive process applications. Water content is not a single purity footnote because the solvent...
Isopropyl Alcohol COA: The 12 Parameters That Actually Matter and How to Read Them For 2-Propanol (CAS 67-63-0), a certificate of analysis is interpreted as a batch-specific release audit rather than a generic purity statement. The document reports analytical results generated on a defined lot against acceptance criteria. In pharmaceutical...
2-Propanol (isopropyl alcohol, CAS 67-63-0) enters downstream manufacturing as a water-miscible secondary alcohol with a closed-cup flash point of 12 °C, a normal boiling point of 82.5 °C, a density of 0.785 g/cm³ at 20 °C, and a vapor pressure of approximately 4.4 kPa at 20 °C. Its lower explosive...
IPA Water Content by Application: Electronics, Pharma, Cosmetics and Coatings Limits Side by Side Isopropyl alcohol is a water-miscible polar solvent with a normal boiling point of 82.5 °C at 101.3 kPa. The moisture concentration in a supplied lot is not a single specification; it is a boundary condition that...
2-Propanol (CAS 67-63-0), also named isopropanol or propan-2-ol, is a polar, water-miscible solvent with a molecular mass of 60.10 g/mol, a boiling point of 82.4 °C at 101.3 kPa, a density of 0.785 g/cm³ at 20 °C, and a refractive index of 1.3772 at 20 °C. The substance is supplied...
Safety data sheets for anhydrous 2-propanol often state a closed-cup flash point of 12°C, while distributor technical data sheets sometimes state 18°C for a product identified as isopropyl alcohol. The apparent conflict—Isopropyl Alcohol Flash Point (Closed Cup): Why an SDS Says 12 C and a Distributor Says 18 C—is resolved...
2-Propanol (isopropanol, IPA; CAS 67-63-0) is a branched secondary alcohol with molar mass 60.10 g/mol, normal boiling point 82.6 °C, and melting point -89.5 °C. Industrial production is based primarily on direct hydration of propene over a solid acid catalyst, followed by recovery from the aqueous reaction product by distillation;...
Commercial 2-propanol (isopropanol, IPA), CAS 67-63-0, is typically supplied as a 99.0 wt% or higher product under ASTM D770-21. The phrase “Isopropanol Hygroscopicity: How Fast 99% IPA Drops Below 99% in an Open Container” describes a coupled mass-transfer condition, not a fixed kinetic half-life. A 99.0 wt% solution contains 10...
2-Propanol (CAS 67-63-0, isopropanol, IPA) is a hygroscopic oxygenated solvent with a molecular weight of 60.096 g/mol, a boiling point of 82.5 °C, a density of 0.7854 g/cm³ at 20 °C, and a closed-cup flash point near 12 °C. A production-grade 99.8 mass % isopropanol release package compares five ASTM...
2-Propanol (CAS 67-63-0; isopropyl alcohol; propan-2-ol) is a water-miscible secondary alcohol with a molecular weight of 60.10 g/mol, a closed-cup flash point of 12 °C, and an autoignition temperature of 399 °C. The solvent is used in pharmaceutical purification, semiconductor wafer cleaning, disinfectant compounding, coating diluent make-up, and laboratory extraction....
IPA Solvent Recovery and Reuse: Purity Limits, Energy Cost and When It Stops Paying 2-Propanol (isopropyl alcohol, IPA, CAS RN 67-63-0) is a medium-volatility polar oxygenated solvent with a normal boiling point of 82.6 °C, a closed-cup flash point of 12 °C, and a latent heat of vaporization of approximately...
Shelf Life and Storage of Isopropyl Alcohol: Sealed vs Opened Containers, Temperature Limits 2-Propanol (CAS 67-63-0), also designated isopropyl alcohol, is a secondary alcohol with a molecular weight of 60.10 g/mol, a density of 0.785 g/cm³ at 20 °C, a closed-cup flash point of 12 °C, and a boiling point...
2-Propanol (CAS 67-63-0), also designated isopropyl alcohol or IPA, is a secondary alcohol used as an active oxygenated solvent in solventborne coatings and liquid printing inks. Industrial coating grades are supplied at 99.5% to 99.9% purity with water content below 0.1% for urethane-grade material under ASTM D1364. The material has...
IPA in Electronics Cleaning: Flux Removal, Stencil Wiping and Residue Control In printed circuit board assembly, 2-propanol (isopropanol, CAS 67-63-0) is applied as a low-boiling polar solvent for removal of rosin-based flux residues, for automatic understencil cleaning of fine-pitch solder paste apertures, and for post-wash residue control. The material is...
Marangoni Drying: Why Fabs Use IPA Vapour to Dry Wafers and What Grade It Requires 2-Propanol (CAS 67-63-0), also designated isopropanol or IPA, functions as a surface-active drying fluid in semiconductor wafer processing. In a Marangoni dryer, a wet wafer or cassette is withdrawn slowly from ultrapure water while an...
Isopropyl Alcohol in Pharmaceutical Manufacturing: ICH Q3C Class 3 and Residue Limits 2-Propanol (CAS 67-63-0; isopropanol; IPA) is a water-miscible secondary alcohol with molecular weight 60.10 g/mol, density approximately 0.785 g/cm³ at 20 °C, boiling point 82.3 °C, vapor pressure approximately 4.4 kPa at 20 °C, and closed-cup flash point...
2-Propanol (CAS 67-63-0; EC 200-661-7; UN 1219) is the C3 branched secondary alcohol with molecular mass 60.10 g mol−1, boiling point 82.5 °C at 101.3 kPa, and closed-cup flash point 11.7 °C for the anhydrous material. The solvent is the active base of WHO-recommended formulation II for local production of...
Commercial 2-propanol, CAS 67-63-0, is a water-white liquid with normal boiling point 82.5 °C, closed-cup flash point 12 °C, and density 0.785 g/cm³ at 20 °C determined by ASTM D4052-22. Technical-grade material is supplied under ASTM D770-11, with water mass fraction controlled to 0.1–0.5% depending on downstream catalyst tolerance; the...
2-Propanol (isopropyl alcohol, IPA), CAS 67-63-0, is a branched C3 alcohol supplied as anhydrous 99.5 wt%, USP, and technical grades. Its molar mass is 60.10 g mol⁻¹, density at 20 °C is 0.785 g cm⁻³, and closed-cup flash point is 12 °C when tested to ASTM D56-21a. The solvent is...
Isopropanol (2-propanol; CAS 67-63-0) and acetone (propan-2-one; CAS 67-64-1) are the two oxygenated solvents most often compared for manual wiping, ultrasonic immersion, and flush cleaning in maintenance and precision manufacturing. The evaluation commonly presented as “IPA vs Acetone for Cleaning and Degreasing: Where Each Wins and Where It Loses” turns...
Replacing Chlorinated Solvents with IPA: Compatibility, Cleaning Efficiency and Cost per Part. The substitution assessment for 2-propanol (isopropanol, CAS 67-63-0) in industrial cleaning requires independent verification of material compatibility, soil-specific cleaning efficiency, and fully burdened cost per part. These three variables interact: a low unit price is not a low...
2-Propanol, also designated propan-2-ol and CAS 67-63-0, is a single defined alcohol with molecular weight 60.10 g/mol, density 0.786 g/cm³ at 20 °C, and closed-cup flash point 12 °C. Industrial production by direct hydration of propylene or by acetone hydrogenation yields an aqueous stream that requires dehydration beyond the isopropanol-water...
The solvent selection decision in coating formulations and pharmaceutical manufacturing frequently narrows to IPA vs n-Propanol and Isobutanol: Secondary vs Primary Alcohols in Coatings and Pharma. 2-Propanol, also designated isopropanol or IPA, is a secondary alcohol with CAS 67-63-0, molecular weight 60.10 g/mol, boiling point 82.5 °C, flash point 11.7...
2-Propanol (isopropanol, IPA; CAS 67-63-0) is a C3 alcohol with molecular weight 60.10 g/mol, normal boiling point 82.5 °C, closed-cup flash point 11.7 °C, and an atmospheric water azeotrope of 87.9 wt% IPA at 80.37 °C. Petrochemical supply is dominated by direct hydration of propylene or indirect sulfuric-acid hydration, yielding...
2-Propanol, CH₃CH(OH)CH₃, enters Chinese export control as a hazardous industrial flammable liquid because its closed-cup flash point is 12.0°C and its boiling point at 101.325 kPa is 82.4°C, placing it within flammable liquid category 2 under GB 30000.7-2013 and the GHS classification criteria. The customs commodity code for this secondary...
2-Propanol (isopropanol, IPA; CAS 67-63-0; molar mass 60.10 g mol⁻¹) is a flammable, water-miscible secondary alcohol with closed-cup flash point 11.7 °C (ASTM D56) and normal boiling point 82.45 °C at 101.3 kPa. Because the vapour pressure at 20 °C is 4.4 kPa, the saturated headspace concentration reaches 4.3 vol%,...
2-Propanol, CAS 67-63-0, also specified as isopropanol, is a saturated C3 alcohol with molecular formula C3H8O and molar mass 60.10 g/mol. The anhydrous material boils at 82.6 °C, exhibits a closed-cup flash point of 11.7 °C, and has a vapor pressure of 4.4 kPa at 20 °C. The lower and...
2-Propanol Sample Shipments from China: Licence, Documentation and Courier Limits Shipment of 2-propanol (CAS 67-63-0; UN 1219) in sample quantities is controlled primarily by its UN Model Regulations classification as a Class 3 flammable liquid, packing group II. The closed-cup flash point of the pure material is 11.7 °C, the...
2-Propanol: Isopropanol SDS and GHS Classification: H225, H319, H336 and Label Duties by Market Safety data sheet authoring for 2-propanol (CAS 67-63-0, EC 200-661-7) begins with the harmonised entry under Regulation (EC) No 1272/2008 Annex VI, index 603-117-00-0. The classification for the neat solvent is Flam. Liq. 2 H225, Eye...
2-Propanol (CAS 67-63-0, EC 200-661-7) is a polar, water-miscible solvent with an initial boiling point of 82.5 °C at 101.3 kPa, a density of 0.786 g/cm³ at 20 °C, a vapor pressure of 4.4 kPa at 20 °C, a dynamic viscosity of 2.4 mPa·s at 20 °C, and a closed-cup...
2-Propanol (CAS 67-63-0), commonly referred to as isopropyl alcohol or IPA, is a secondary aliphatic alcohol with a molecular weight of 60.10 g/mol, a boiling point of 82.5 °C, and a closed-cup flash point of approximately 11.7 °C. In hand sanitiser applications, it functions as a topical antiseptic active ingredient...
2-Propanol (isopropyl alcohol, CAS 67-63-0, UN 1219) is supplied as a clear, water-miscible flammable solvent with bulk assay typically 99.5 wt% or higher for export. The material is not a dual-use precursor and is not listed in Annex I of Regulation (EU) 2021/821, but its transport and hazard classification generate...
2-Propanol, the chemical trade identity for isopropyl alcohol, is assessed at import under HS 2905.12; import duty by destination, GST or VAT, and preferential treatment are determined separately and must be reconciled at the entry line. The subheading is limited to the propan-2-ol isomer and is not generally split by...
As a polar solvent, disinfectant intermediate, and chemical feedstock, 2-propanol (isopropanol, IPA, CAS 67-63-0) is imported into India under tariff item 2905 12 20. Anhydrous commercial material is routinely specified at 99.5 wt% minimum, with water not exceeding 0.1 wt%; the atmospheric-pressure water azeotrope contains approximately 87.7 wt% isopropanol and...
2-Propanol, commonly specified as isopropyl alcohol, is a C3 oxygenated solvent with a molar mass of 60.10 g/mol, an atmospheric-pressure boiling range of 82.0–82.6 °C, a closed-cup flash point near 12 °C, and a density of 0.786 g/cm³ at 20 °C. Imported into India under ITC(HS) 29051220, the product is...
For imported 2-propanol (IPA, CAS 67-63-0; ITC HS 2905 12 20), the landed cost of IPA in India: BCD, SWS, IGST and the three published total-rate figures is determined by a statutory cascade rather than a single tariff line. The material is a water-miscible, Class 3 flammable solvent with a...
2-Propanol ISO Tank Loading Parameters: Net Weight, Filling Ratio and the 18.5 t Benchmark 2-Propanol (isopropyl alcohol, IPA; CAS 67-63-0) is transported as UN 1219, Class 3, Packing Group II, with a closed-cup flash point of approximately 11.9 °C and an initial boiling point of 82.5 °C. The ISO tank...
Drums vs IBC vs ISO Tank for IPA: A Landed-Cost Comparison at 5, 15 and 25 Tonnes 2-Propanol (CAS 67-63-0), specified in commerce as isopropanol or IPA, is a Class 3 flammable solvent with a closed-cup flash point of 12 °C measured by ASTM D56, a density of 0.785 g/cm³...
How Many Drums of IPA Fit in a 20 ft and 40 ft Container? Net Weight and Gross Weight Limits 2-Propanol (isopropanol, IPA, CAS 67-63-0) is consigned as UN 1219, Class 3, Packing Group II, with a flash point of 12 °C by ISO 3679 closed-cup and a boiling point...
2-Propanol (CAS RN 67-63-0; isopropyl alcohol; IPA) is assigned to UN 1219, Class 3, Packing Group II in the UN Model Regulations. The classification is driven by a closed-cup flash point of approximately 12 °C measured by ISO 3679 and an initial boiling point of 82.5 °C determined by ASTM...
2-Propanol (CAS 67-63-0; UN 1219; Class 3; Packing Group II) is transported as anhydrous solvent, azeotropic water mixture, or 70% aqueous solution. The closed-cup flash point is 12 °C by ASTM D56, the boiling point is 82.5 °C at 101.3 kPa, and the vapour pressure is 4.4 kPa at 20...
Isopropyl Alcohol Price per Tonne 2026: FOB China, CFR and Domestic — Aligning Three Different Quotes 2-Propanol (CAS 67-63-0, molecular weight 60.10 g/mol) enters 2026 contract negotiations as a solvent and intermediate with divergent quotation bases across export and domestic channels. A single tonne of isopropyl alcohol is not commercially...
2-Propanol (isopropanol, IPA; CAS 67-63-0) is a C3 oxygenated solvent with molecular mass 60.10 g/mol, boiling point 82.5 °C, flash point 12 °C, and density 0.786 g/cm³ at 20 °C. The operational reference for this analysis is the IPA Price Formation Model: Propylene, Acetone, Freight and the Margin Between Two...
Procurement of 2-propanol (isopropyl alcohol, CAS 67-63-0) across multiple suppliers requires that five quotation variables be normalized before price ranking. The five variables are pricing basis, Incoterms, package configuration, assay specification, and payment tenor. A quote expressed as 1,650 USD/mt FOB Busan with assay 99.5 wt% in 200 L epoxy-phenolic...
IPA Landed Cost Calculator: From FOB China to Your Warehouse, Line by Line In landed cost modeling for imported solvents, 2-propanol (CAS 67-63-0, EC 200-661-7) is treated as a flammable, hygroscopic liquid with a closed-cup flash point of 11.7 °C, a boiling point of 82.3 °C, and a density of...
2-Propanol (isopropyl alcohol; CAS 67-63-0; molar mass 60.10 g/mol; density 0.786 g/cm³ at 20 °C) is classified under the Globally Harmonized System for Hazard Communication as Flam. Liq. 2, Eye Irrit. 2, and STOT SE 3, with hazard statements H225, H319, and H336. The procurement question “Can You Get an...
Bulk acquisition of 2-propanol (isopropyl alcohol, IPA) links flammable liquid logistics to bank and supplier obligations. Payment Terms for Bulk IPA: LC, TT and Open Account Compared must be evaluated against cargo release, demurrage, and the documentary behavior of terminal operators rather than as an isolated treasury decision. The liquid...
2-Propanol (CAS 67-63-0, molar mass 60.10 g/mol) is supplied as a clear, volatile, water-miscible solvent with a closed-cup flash point of 12 °C and a normal boiling point of 82.5 °C. The commercial material is also designated isopropyl alcohol, isopropanol, IPA, and propan-2-ol. Its suitability for pharmaceutical purification, semiconductor surface...
2-Propanol (CAS 67-63-0), also known as isopropyl alcohol or IPA, is traded as a bulk oxygenated solvent and chemical intermediate. Industrial-grade material is commonly specified against ASTM D770, which addresses test methods for water content, distillation range, acidity, and non-volatile residue. The compound has a closed-cup flash point of 12...
Recovery of 2-propanol (IPA) from spent cleaning and carrier-solvent streams is evaluated with the Solvent Recovery ROI Model for IPA Users: Three Operating Scenarios. The model basis uses 99.9 wt% virgin 2-propanol at 1.50 USD/kg, hazardous waste disposal at 0.85 USD/kg for D001 ignitable liquid under 40 CFR 261.21, electricity...
2-Propanol (CAS 67-63-0), also designated isopropyl alcohol, is a secondary alcohol with molar mass 60.10 g/mol and normal boiling point 82.6 °C at 101.3 kPa. It is fully miscible with water and common organic solvents; the atmospheric binary azeotrope with water contains 87.7 wt% 2-propanol and boils at 80.3 °C....
Isopropyl Alcohol Buyer FAQ: 20 Questions and Answers Before the First Order 2-Propanol, CAS 67-63-0, is supplied as a Class IB flammable solvent with a boiling point of 82.6 °C at 101.3 kPa, vapor pressure of 4.4 kPa at 20 °C, and a closed-cup flash point of 12 °C. First-order...
2-Propanol (CAS 67-63-0), also designated isopropanol or IPA, is a polar secondary alcohol with a normal boiling point of 82.5 °C, a closed-cup flash point of 12 °C, and a density of 0.785 g/cm³ at 20 °C. The vapor pressure is 4.4 kPa at 20 °C; the vapor density is...
In bulk chemical sourcing, 2-propanol (isopropanol, CAS 67-63-0) is increasingly governed by structured off-take instruments rather than discrete spot transactions. The contractual focus of IPA Off-Take and Long-Term Supply Agreements: Price Mechanism and Volume Tier Terms is to bind a buyer to a minimum annual quantity while giving both parties...
2-Propanol (isopropanol, isopropyl alcohol, IPA) is a saturated secondary alcohol with CAS 67-63-0, condensed structure (CH3)2CHOH, and molecular weight 60.10 g/mol. It is manufactured at industrial scale by direct hydration of propylene or by acetone hydrogenation and is supplied as anhydrous, electronic, USP/NF, and FCC grades. The order file for...
2-Propanol (CAS 67-63-0; isopropyl alcohol, UN 1219) is supplied with the Isopropyl Alcohol Documentation Bundle: COA, SDS, TDS, GHS Label and Packing Certificate. The bundle separates lot-specific analytical evidence from regulatory hazard communication, physical property data, immediate container marking, and transport packaging verification. This distinction is operationally significant because the...
2-Propanol, also designated isopropyl alcohol and propan-2-ol under CAS 67-63-0, is a clear, water-white, hygroscopic secondary alcohol with a closed-cup flash point of 12°C, a boiling point of 82.5°C at 101.3 kPa, a lower flammable limit of 2.0 vol%, an autoignition temperature of 399°C, a vapor pressure of 4.4 kPa...
Isopropyl Alcohol Suppliers by Grade and Region: A Source Directory Index 2-Propanol is indexed under CAS 67-63-0, EINECS 200-661-7, and UN 1219 for flammable liquid transport. The directory separates supplier entries by grade class and region because technical, pharmaceutical, ACS reagent, cosmetic, food, and electronics grades differ by more than...
2-Propanol: Isopropyl Alcohol Wholesale and Trial Orders from a China Supplier: MOQ, Packaging and Cost Sheet At ambient temperature, 2-propanol (CAS 67-63-0) is a colorless, low-viscosity solvent with a molar mass of 60.10 g/mol, a boiling point of 82.4 °C, a closed-cup flash point of 12 °C, and a vapor...
The administration of 2-propanol (CAS 67-63-0; molar mass 60.10 g/mol) under distributor and agent structures requires the phrase Isopropyl Alcohol Distributor and Agent Partnerships: Territory Terms and Compliance Allocation to be read as a chemical supply-chain control problem rather than as a generic commercial framework. The substance is miscible with...
2-Propanol (CAS 67-63-0, C3H8O, molar mass 60.10 g/mol) is the secondary alcohol supplied as isopropanol in original-equipment-manufacturer and private-label programs. At 101.325 kPa, the normal boiling point is 82.5 °C, the ISO 13736 closed-cup flash point is 11.7 °C, and the autoignition temperature is reported at 399 °C. Because the...
2-Propanol: Technical-Grade Composition and Supply-Chain Qualification 2-Propanol (isopropanol, isopropyl alcohol, CAS 67-63-0) is a secondary alcohol with molar mass 60.10 g/mol, density 0.786 g/cm³ at 20 °C, closed-cup flash point 11.7 °C, and normal boiling point 82.4 °C. The liquid is manufactured by indirect hydration of propylene in a sulfuric...
Isopropyl Alcohol Traders vs Manufacturers in China: Contract and Liability Comparison 2-Propanol (CAS 67-63-0, molar mass 60.10 g/mol) is procured as a solvent for pharmaceutical sanitization, precision cleaning, coating formulations, and chemical intermediates. Chinese supply chains offer direct sales from propylene hydration or acetone hydrogenation producers and flexible spot sales...
2-Propanol (propan-2-ol, isopropyl alcohol, CAS 67-63-0, molecular formula C₃H₈O, molar mass 60.10 g/mol, normal boiling point 82.5 °C at 101.3 kPa) functions as a process solvent, sanitizing agent, cleaning intermediate, and extraction medium across pharmaceutical, personal-care, microelectronics, coatings, and chemical synthesis operations. Qualified vendor registration for isopropyl alcohol suppliers: what...
Buying Isopropyl Alcohol Factory Direct: What It Really Changes in the Contract 2-Propanol, CAS 67-63-0, is a flammable oxygenated solvent with a normal boiling point of 82.5 °C at 101.3 kPa, a flash point of 12 °C closed cup, a density of approximately 0.785 g/cm³ at 20 °C, and a...
Specifying 2-propanol for an isopropyl alcohol supplier for electronics manufacturing requires control of grade, water content, and lead time as interdependent variables rather than isolated procurement fields. 2-Propanol (CAS 67-63-0) has a density of 0.786 g/cm³ at 20 °C, a vapor pressure of 4.4 kPa at 20 °C, a closed-cup...
2-Propanol (isopropyl alcohol, IPA; CAS 67-63-0) is produced in China through two principal process routes: direct propylene hydration and acetone hydrogenation, with a smaller share of legacy indirect sulfuric-acid hydration still present at integrated refinery-petrochemical sites. The assessment of Isopropyl Alcohol Manufacturers in China 2026: Capacity, Process Route and Export...
Top Isopropyl Alcohol Manufacturers in China: A Verified List and How to Verify It 2-Propanol (isopropyl alcohol, CAS 67-63-0) is a secondary alcohol produced in China by direct hydration of propylene and by hydrogenation of acetone. The phrase “Top Isopropyl Alcohol Manufacturers in China: A Verified List and How to...
Isopropyl Alcohol Producers in China: Who Owns the Propylene and Who Buys Acetone 2-Propanol (CAS 67-63-0) is a colourless secondary alcohol with a normal boiling point of 82.5 °C and a closed-cup flash point near 12 °C. The product sits across two distinct Chinese feedstock chains: refinery or propane-dehydrogenation propylene...
Isopropyl Alcohol Plant Scale and Turnaround: Reading Public Outage Data Before You Commit requires a distinction between reported capacity and marketable grade-specific capacity. 2-Propanol, CAS 67-63-0, is produced predominantly through indirect sulfuric acid hydration of refinery-grade propylene or through direct catalytic hydration over a fixed-bed catalyst; acetone hydrogenation remains a...
Procurement of 2-propanol (CAS 67-63-0) for high-purity solvent use depends on a documented Isopropyl Alcohol Factory Direct vs Trader Supply: Contract and Liability Comparison before a bulk source is qualified. 2-Propanol, also called isopropanol or propan-2-ol, is a Class IB flammable liquid with a closed-cup flash point of 11.7 °C,...
2-Propanol, CAS 67-63-0, is manufactured by direct catalytic hydration of propylene and by selective hydrogenation of acetone. The two routes produce different impurity distributions: hydration-derived material may retain trace propionaldehyde and propane, while acetone hydrogenation can retain acetone and water. Because the solvent is used in pharmaceutical granulation, semiconductor cleaning,...
2-Propanol: Isopropyl Alcohol COA and Export Packaging Straight from the Manufacturer 2-Propanol (CAS 67-63-0, UN 1219) is transacted as isopropyl alcohol on the basis of a manufacturer-issued certificate of analysis that accompanies each export lot. The document links the batch identity to the filling campaign, the storage tank number, the...
