|
HS Code |
739910 |
| Product Name | DOW HDPE 6900 |
| Type | High Density Polyethylene |
| Melt Flow Index 190c 2 16kg | 7.0 g/10 min |
| Density | 0.952 g/cm3 |
| Tensile Strength At Yield | 28 MPa |
| Elongation At Break | 600% |
| Flexural Modulus | 1050 MPa |
| Notched Izod Impact 23c | 60 J/m |
| Hardness Shore D | 67 |
| Vicat Softening Point | 124°C |
| Maximum Processing Temperature | 230°C |
| Applications | Blow molding, bottles, containers |
As an accredited DOW HDPE 6900 factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | DOW HDPE 6900 is typically packaged in 25 kg white plastic bags, featuring the Dow logo, product name, and handling instructions. |
| Shipping | DOW HDPE 6900 is shipped in tightly sealed, moisture-resistant polyethylene bags, typically weighing 25 kg each, or in bulk containers. Shipments are securely palletized and shrink-wrapped to prevent contamination and damage during transit. All handling complies with relevant safety and transportation regulations for plastic resin materials. |
| Storage | DOW HDPE 6900 should be stored in a cool, dry, and well-ventilated area away from direct sunlight, heat sources, and moisture to prevent degradation. Keep the product in its original, tightly sealed packaging to avoid contamination. Avoid exposure to strong oxidizing agents. Ensure that storage areas comply with all applicable local, state, and federal regulations for safe handling of plastics. |
Applications of DOW HDPE 6900 in Industrial ManufacturingDOW HDPE 6900 delivers performance benefits across several manufacturing sectors due to its combination of high density, molecular weight, and unique processing properties. As a manufacturer, we supply this grade for applications where consistency, processability, and compliance with international quality and safety standards are critical to the end use. The following sections detail where DOW HDPE 6900 integrates into complex production environments. 1. Pressure Pipe Systems for Potable WaterThis grade serves municipal and commercial water network manufacturers who require both pressure and environmental resistance. By leveraging its bimodal molecular structure, customers achieve the durability and creep performance demanded in modern pipelines, particularly in buried or industrial supply lines. Regulatory agencies increasingly require full traceability and compliance, impacting formulations and plant process conditions directly from extrusion through end sealing and quality control. The grade’s stress crack resistance supports confidence through the full service life of pipe installations. Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
2. Blow-Molded Industrial Chemical DrumsManufacturers select this grade for producing high-capacity, heavy-walled industrial drums that must hold aggressive chemicals or hazardous substances. Processors value the melt strength and viscosity stability, supporting uniform wall thickness even in large-part blow molding. The material’s resistance to stress cracking and impact is central to minimizing container failure risks in distribution and harsh transport scenarios. Formulations balance material purity to comply with hazardous goods handling regulations and maximize drum lifecycle under repeated use and cleaning cycles. Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
3. Large-Scale Agricultural Irrigation PipeManufacturers in the agricultural sector depend on HDPE 6900 for its resistance to both chemical fertilizers and UV aging when producing high-pressure irrigation and sub-main pipes. The resin’s balance of molecular distribution supports high output speeds with reliable fusion weldability on-site. Formulators adjust stabilizer packages in direct consultation with agronomic clients to meet application-specific requirements, as field longevity and hydraulic performance directly impact farming operations. Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
4. High-Durability Pallets and Logistics ContainersHDPE 6900 enables the production of industrial pallets, crate systems, and logistics bins enduring dynamic loads, repeated handling, and outdoor storage. Customers prioritize this grade’s balance of stiffness, impact performance, and environmental resistance when replacing wood or metallic transport platforms. The resin supports cost-effective molding cycles while complying with reusable packaging hygiene standards in food and pharmaceutical logistics streams. End-users typically specify anti-slip, color-fast, or RFID-embedded features, influencing the additive and process controls upstream. Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
5. Geomembrane Liners for Environmental ContainmentThis grade is a preferred choice for thick-gauge geomembrane sheet producers, offering the chemical and environmental durability crucial for landfill, mining, and water containment. Processors benefit from the balance of slow crack growth resistance and flexibility, allowing for reliable field welding and long deployment life under static and dynamic loads. Manufacturers develop formulations based on field exposure predictions, while regulatory documentation supports specification compliance for critical infrastructure projects. Industry compliance standards
Typical usage ratio
Downstream process integration
Final product types
|
Competitive DOW HDPE 6900 prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to admin@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: admin@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
Manufacturing high-density polyethylene pushes us to solve real-world packaging and production challenges daily. Over three decades, we’ve learned plenty about what resin processors expect: consistency, performance, trust in every load. DOW HDPE 6900 steps up in this environment, outperforming conventional grades in large-scale film blowing, industrial containers, and heavy-duty applications. We produce, test, and ship it ourselves. This hands-on experience matters when customers stake millions of packages, sleeves, or containers each year on our resin’s performance.
DOW HDPE 6900, an injection molding and blow molding grade, brings together robust mechanical strength and exceptional processability. Customers rely on it to produce agricultural drums, chemical storage, liners, heavy-duty shipping bags, and tanks where chemical resistance and environmental stress crack resistance aren’t optional. Some conventional grades might deliver on drop strength but fail under aggressive chemical or UV exposure. In contrast, we see end users run 6900 in high-output lines with fewer process hiccups, less scrap from pinholing, and remarkable lifecycle performance in typical wear-and-tear tests.
Choosing among HDPE resin grades gets confusing. Properties like density, molecular weight distribution, and melt flow index account for a lot, but experience on the plant floor tells us more. DOW HDPE 6900 carries a balanced density—typically around 0.96 g/cm³—aligned for rigidity and impact tolerance. With a melt index commonly near 0.25 g/10min, the resin navigates both thick-walled and thin-walled molding jobs, preventing warping or internal stress-failures even at elevated processing speeds. Where commodity HDPE grades lag, especially in ESR (Environmental Stress Crack Resistance), this product maintains container integrity in corrosive environments, giving peace of mind for both our team and those who fill the barrels, ship the containers, or export the film.
We’ve learned that switching between different sources or off-grade supply never saves money in the long run. You can feel differences in pellet uniformity and see effects on extrusion stability. We keep tight control over polymerization, post-reactor processing, and pelletizing. Plant engineers routinely comment on the stable throughput and low die-lip buildup they achieve with 6900. Our own QA teams track melt flow and mechanical data from batch to batch, so every truckload upholds the same processing benchmarks as the sample you received on day one.
Some HDPE manufacturers cut corners with catalyst blends or shortcut compounding. We stick with established process designs because the market rewards reliability over short-term gains. DOW HDPE 6900’s high molecular weight resin translates to resistance to slow crack growth, proven in drum drop tests and practical long-term field trials. Customers in pesticide packaging and chemical storage often return with anecdotes—drums made from 6900 are less likely to develop leaks in climate-variable warehouses or during multi-year outdoor use. That feedback isn’t just marketing; it stems directly from the polymer backbone and the precision in every production run.
Customers choose DOW HDPE 6900 where mechanical and environmental demands converge. These include 200-liter drums for industrial transport, food packaging where organoleptic neutrality matters, and agricultural chemical tanks exposed to harsh sun and diverse storage conditions. Experience teaches us that thinner-walled containers, produced at high speeds with uneven cooling, develop stress points on average HDPE. This resin resists those pitfalls, preventing early cracking, wall deformation, or substrate failures that drive up warranty claims. You will find it in blown-film liners that stay intact after five years in cold storage and in drums trucked across hot, dusty highways.
Resin behavior during extrusion or molding often determines a plant’s real yield and cost-per-unit. DOW HDPE 6900 responds with consistent melt strength, permitting stable bubble formation, less draw resonance, and tight control over gauge profiles. Processors feeding this resin into blown film lines notice less fluctuation in film thickness—even during long runs. There’s also less surge or backpressure variation during injection, which translates into faster cycle times and lower part deformation rates. These details, learned firsthand, weigh more heavily than abstract metrics published in data sheets.
Every pound of resin counts. Our operations strive to maximize vessel fill and minimize waste in downstream conversion. In our own QC trials, DOW HDPE 6900 shows lower neck-in and curling in film extrusion, making it straightforward for slitters and converters. Scrap reduction is not just about percentages on a spreadsheet. With markets growing more competitive, each kilogram saved over millions of pounds annually pads the bottom line for processors and end-users alike. Less waste also eases the burden at the landfill, keeping with evolving packaging regulations and internal environmental commitments manufacturers juggle daily.
Sustainability in plastics manufacturing shifts every few years, driven by regulation and consumer demand. HDPE, already widely recycled worldwide, faces scrutiny in single-use packaging applications. DOW HDPE 6900 holds an edge by facilitating down-cycling and reuse cycles; the resin tolerates multiple melt histories with minimal loss in mechanical properties. We see customers successfully reclaim and reprocess containers, drums, and films containing 6900 resin—achieving high recovery yields without gelling, fisheyes, or significant haze buildup. This experience supports our belief in HDPE as a recyclable material that meets today’s demands for both quality and sustainability.
HDPE isn’t a one-type-fits-all story. Commodity grades clamor for lowest unit price and sometimes sacrifice environmental crack resistance or physical stability. We manufacture DOW HDPE 6900 for customers unwilling to gamble on structural failures or short-run cost savings that erode tenfold through part recalls or leaks. Unlike some ultra-high molecular weight HDPE grades, 6900 doesn’t require exotic processes, special drying equipment, or extended cooling cycles. Its process window matches what most modern extruders and molds already support. By controlling reactor conditions, blending, and pelletization ourselves, batch-to-batch consistency outpaces market alternatives, building trust with processors managing enormous product runs.
We base our processes on physical property controls, but customer feedback remains the ultimate benchmark. In extensive drop, puncture, and stackers’ load tests, containers built from 6900 pass with margin to spare, holding up against hazardous chemicals and agricultural substances. Melt index and density stay tight within published ranges each batch, so processors need fewer adjustments for viscosity swings or unpredictable dwell times. Value comes not just from spec sheets, but the stubborn reliability traced to our quality controls. These methods cut downtime, unexpected mold jams, and part inconsistencies that eat away at productivity. What’s on the page must hold up at scale, shift after shift, in real plants with real deadlines.
Most of our largest partners run high-speed extrusion and molding lines, and many operate 24 hours a day. They tell us resin downgrades, or surprise property drifts, show up quickly as process upsets or off-spec product. DOW HDPE 6900’s manageable melt flow facilitates reliable throughput, untroubled by batch-to-batch shifts, while its robust mechanical backbone resists the kind of fatigue that leads to line stoppages and emergency maintenance events. Keeping maintenance calls to a minimum helps every packaging plant run more predictably. Nobody wants to scramble after a shipment of containers fails a pressure or drop test because of resin property swings.
Some customers in the food industry run up against migration and odor concerns, unwilling to risk contaminates in food contact packaging. The resin’s basic formulation ensures low extractables and odor transfer. We run compliance trials in accordance with North American and European regulations, so our product meets the standards processors need. This is another area where we conduct internal audits—nobody wants to roll the dice on a rejected shipment or a recall triggered by off-smell or extractive surprises.
One drum manufacturer in central China once told us about a time they briefly switched resins, seeking a cheaper deal. What followed was a spike in scrap rates, frequent crack formation during drop impact tests, and headaches on the production line. Their switch back to DOW HDPE 6900 stabilized production, lowered downstream waste, and erased customer complaints about leaking drums. These stories echo far beyond a spreadsheet: they add up to supplier trust, reduced process risks, and reputations built on decades rather than months.
Supply chain disruptions and unpredictable resin costs throw new hurdles every year. We coordinate with upstream monomer suppliers, track trends in regional demand, and keep buffer inventories to weather market swings. Our familiarity with international shipping routes, import regulations, and local distribution gives customers confidence in steady deliveries. In our own packing warehouses, QA checks happen before every outbound shipment. Shipments reach global ports from North America to Asia, keeping plant lines filled and production targets met.
Those of us who have dealt directly with extrusion, storage, and shipping headaches know that support means more than a call center or an online form. Our technical teams get involved on-site, troubleshooting process settings, helping optimize cooling or blending for the local plant setup. We share best practices for venting, curing, and downstream welding based on hundreds of real-world plant runs using 6900 resin. Recommendations follow from genuine experience—not just theory or simulation. Processors appreciate this hands-on approach when downtimes hurt profit margins and pressure stacks up at every shift change.
New packaging waste laws, stricter chemical containment protocols, and evolving recycling standards change frequently across markets. We routinely retrofit production lines and document compliance steps so that each batch aligns with the regulations in its destination country. Our compliance experts pull from export experience and maintain up-to-date dossiers, keeping new products and applications ahead of rule changes. Chemical and agricultural packagers count on this kind of foresight to avoid market penalties and rejected imports.
There’s no replacement for time spent running material through the line, listening to customer concerns, and seeing containers survive challenging field conditions. Every insight woven into DOW HDPE 6900 ties back to first-hand manufacturing experience—facing machine breakdowns, quick-turn orders, and evolving product specs. The result is more than a polymer grade. It’s confidence for packagers moving high-value goods, reassurance for the teams running overnight lines, and trust for those shipping drums across continents.
We don’t believe in resting on established formulations. Over the years, our teams have fine-tuned reactor conditions and downstream handling to edge out small improvements in resin purity, pellet uniformity, and conversion efficiency. Feedback from partners brings practical insights: what tweaks allow for lighter container weights, how cooling settings interact with regional humidity changes, where pellet consistency reduces machine wear. Every batch of DOW HDPE 6900 embodies these lessons.
Our experience stretches from supplying multinational chemical companies to working with small regional film producers. Each brings its own set of production quirks and quality demands. By focusing on resin that satisfies the strengths and limitations of both large continuous processors and smaller, batch-oriented producers, DOW HDPE 6900 sustains its role on a variety of manufacturing floors. From large-diameter water piping production to food-safe liners, versatility comes from deliberate engineering, not luck or one-size-fits-all promises.
As industry standards change, driven by consumer awareness, regulatory shifts, and advances in recycling, the foundational attributes of DOW HDPE 6900 remain. Its value isn’t rooted in cost-down cuts or the latest marketing trends, but in the quiet reliability proven year after year. We know the price of a failed container or a missed shipment in lost customer trust far outweighs pennies saved on off-grade resin shipments. Our commitment to quality, process control, and support for partner success guides every batch produced.
Supplying DOW HDPE 6900 involves more than filling rail cars and tanker trucks. Every deal, every delivery, echoes with supplier responsibility that shapes the work of processors, packagers, and exporters. Through continual investment in process control, hands-on technical support, and a willingness to adapt to changing market needs, we aim to lead—not follow—in HDPE performance and reliability. Experience, integrity, and the drive to solve customers’ real challenges remain our greatest assets in manufacturing high-value polyethylene.
