| HS Code | 526975 |
| Name | Sodium Percarbonate |
| Chemicalformula | 2Na2CO3·3H2O2 |
| Chemicalname | Sodium carbonate hydrogen peroxide (2:3) |
| Casnumber | 15630-89-4 |
| Ecnumber | 239-707-6 |
| Molecularweight | 314.02 g/mol |
| Appearance | White granular powder or crystalline solid |
| Odor | Odorless |
| Activeoxygencontent | Approximately 15.3% |
| Hydrogenperoxidecontent | Approximately 32.5% |
| Ph | About 10.5-11.5 for a 1% aqueous solution at 20°C |
| Solubilityinwater | Soluble in water, releasing hydrogen peroxide and oxygen |
| Bulkdensity | Typically 0.8-1.2 g/cm³ |
| Decompositiontemperature | Begins to decompose above about 50°C |
| Meltingpoint | Decomposes before melting |
| Stability | Stable under cool, dry conditions; decomposes with moisture, heat, acids, or reducing agents |
| Incompatiblematerials | Acids, reducing agents, combustible materials, and some metals |
| Shelflife | Typically 12-24 months in sealed, dry storage |
| Particlesize | Commonly 300-1200 µm depending on grade |
| Purity | Common commercial grades 85-95% |
As an accredited Sodium Percarbonate factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
| Packing | Sodium percarbonate supplied in 25 kg polyethylene-lined, moisture-resistant woven sacks, labeled with oxidizer hazard symbols and safe-handling instructions. |
| Container Loading (20′ FCL) | 20′ FCL loading of Sodium Percarbonate: Class 5.1 oxidizer, UN 3379, keep dry, ventilated, secured, away from heat, incompatible materials. |
| Shipping | Sodium percarbonate (UN 3378, Class 5.1, PG III) ships as an oxidizing solid in sealed, compatible packaging such as lined bags, drums, or FIBCs. Keep dry and cool, away from acids, flammables, heat, and moisture. Mark with oxidizer labels and follow transport regulations. |
| Storage | Store sodium percarbonate in a cool, dry, well-ventilated area away from heat, ignition sources, moisture, and direct sunlight. Keep containers tightly closed to prevent decomposition and oxygen release. Separate from acids, reducing agents, combustible materials, and other incompatible substances. Avoid dust generation and follow local regulations. Store only in original or compatible containers. |
| Shelf Life | Typically two years if kept cool, dry, and sealed; moisture and heat accelerate decomposition and shorten shelf life. |
Granulated sodium percarbonate with a particle size distribution of 850–1,400 µm and a minimum active oxygen content of 13.0% is post-dosed into a spray-dried base bead at the final weighing stage of household heavy-duty laundry powder production. The coated granule is selected because uncoated percarbonate sorbs free moisture above 55% relative humidity and loses peroxide stability when stored at temperatures above 40 °C in contact with zeolite-bound water; sodium silicate-coated or polymer-coated grades with a drop breakage index below 0.5% after one drop are preferred for pneumatic transfer. In ribbon mixers or conical screw mixers, the base powder is first cooled to below 35 °C and the percarbonate is added after zeolite, sodium carbonate, and sodium sulfate fillers, preventing the persalt granule from acting as a grinding aid that cracks the coating and exposes the peroxide core. The addition ratio in standard household powders is 5–15 wt% sodium percarbonate, with 1–4 wt% tetraacetylethylenediamine as the bleach activator; the persalt-to-activator ratio is maintained between 3:1 and 5:1 to generate peracetic acid within the 30–60 °C main wash. Terminal product forms include compact powders, regular powders, laundry tablets, and single-dose oxygen booster sachets; each requires different compaction or filling lines, but the post-dosing sequence remains identical. Compliance is framed by Regulation (EC) No 648/2004 on detergents and the CLP Regulation (EC) No 1272/2008; sodium percarbonate is classified as an oxidizing solid and requires labeling if package weight thresholds are exceeded. REACH registration data for the substance require occupational exposure controls during bulk handling because dust deflagration and peroxide decomposition are the two primary process hazards. Active oxygen retention is monitored by permanganometric titration after the formulation is stored for 4 weeks at 32 °C and 80% relative humidity; a retention below 85% triggers reformulation of the coating or reduction of the matrix moisture to below 8 wt%. The post-dosing step must not occur in high-shear granulators with impeller tip speeds above 15 m/s, because high-shear contact fractures the percarbonate coating and causes localized water release from the base granule, producing oxygen pockets that blow off poorly sealed package closures.
| Finished format | Sodium percarbonate wt% | TAED wt% | Base powder moisture wt% | Bulk density g/L |
|---|---|---|---|---|
| Regular laundry powder | 5–10 | 1–2 | 8–10 | 500–650 |
| Compact laundry powder | 10–15 | 2–4 | 6–8 | 700–900 |
| Oxygen booster sachet | 20–40 | 0–5 | ≤2 | 600–800 |
In phosphate-free automatic dishwasher formulations, sodium percarbonate is the dominant solid oxygen source because sodium hypochlorite is incompatible with enzymes and creates trichloramine off-gassing in domestic dishwasher interiors. The addition ratio is 18–42 wt% sodium percarbonate in the finished tablet, with 2–5 wt% tetraacetylethylenediamine and 1–3 wt% nonionic low-foam surfactants. Dry granular raw materials are blended in plowshare mixers at speeds below 120 rpm, then compacted on rotary tablet presses with 20–40 kN compression force and 12–18 mm tablet diameter; tablet hardness is maintained between 80–180 N, and the disintegration time is tested as below 15 min according to IEC 60436:2015 conditions. The resulting finished goods span single-dose tablets, wrapper-free multi-benefit tablets, and PVA film pods, where free moisture below 2 wt% is critical to prevent film dissolution before washing. The process conflict is non-linear: compression force below 15 kN causes capping and lamination, while force above 50 kN fractures percarbonate particles and accelerates peroxide decomposition during storage. Silver protection agents such as benzotriazole are dosed separately because percarbonate alone cannot prevent glass-ware corrosion and silver tarnishing in soft-water cycles. Compliance is anchored to Regulation (EC) No 648/2004, the EU Ecolabel criteria for dishwasher detergents, and the biodegradability screening of organic activators under OECD 301B. The anhydrous production environment and the oxidizing classification of percarbonate require dust-control systems and avoidance of incompatible reducing agents in the same mixing suite.
Institutional tunnel washers operating at water exchange rates of 8–12 L/kg dry linen and final extraction pressures above 20 bar require a solid peroxygen source with slower dissolution than liquid hydrogen peroxide. Sodium percarbonate is dosed at 1.0–4.0 kg per 100 kg dry linen in the main wash when bath temperature is between 55–75 °C; at lower wash temperatures of 30–40 °C, tetraacetylethylenediamine must be included at 0.3–1.2 kg per 100 kg dry linen. The dry powder is dispensed via automatic weighing hopper to a slurry mixer and then injected into the second wash compartment; liquid alkali and polymer anti-redeposition agents are dosed separately to avoid a pH spike above 10.8 because silicate-stabilized percarbonate releases carbonate and raises alkalinity. Finished linen types processed through this route include industrial workwear, healthcare linen, mats, and mops; each fabric class imposes a different maximum residual pH below 8.5 to avoid skin irritation after high-temperature drying. Compliance is defined by ISO 15797:2018 for industrial laundering and finishing of workwear, together with Regulation (EC) No 648/2004 for the detergent formulation and CLP Regulation (EC) No 1272/2008 for occupational handling. The main operational boundary is tunnel-washer water reuse: if rinse water recycling allows carbonate to accumulate above 300 mg/L as CaCO₃, percarbonate-derived sodium carbonate can deposit on linen surfaces and increase bath viscosity, requiring higher rinse volumes or acid neutralization.
Within dairy, brewery, and aseptic beverage plants, sodium percarbonate is compounded into alkaline peroxide cleaning powders for removal of polymerized protein, calcium oxalate beerstone, and reverse-osmosis biofouling that caustic soda alone cannot oxidatively lift. In clean-in-place circuits, the working solution is prepared at 1.0–2.5 wt% for heavily soiled plate heat exchangers, or 0.5–1.0 wt% for continuous membrane maintenance cleaning, and is recirculated at 45–65 °C for 15–30 min through centrifugal pumps delivering 1.5–3.0 m/s linear velocity across 304 and 316L stainless steel surfaces. End-use forms for this segment are CIP powders, membrane cleaning sachets, and foaming equipment gels prepared by adding percarbonate to nonionic foam boosters. Compliance for food-contact equipment cleaning is established under FDA 21 CFR 178.1010 when the percarbonate is part of a sanitizing solution and under European food hygiene Regulation (EC) No 852/2004 through validated cleaning residues; 3-A Sanitary Standards for dairy equipment require that cleaned surfaces show zero visible protein residue. For thin-film composite polyamide reverse-osmosis membranes, polyamide oxidant tolerance is the operative constraint: cleaning protocols are validated against membrane manufacturer warranty limits because hydrogen peroxide concentrations above 1,000 mg/L may increase salt passage on exposed elements, depending on membrane manufacturer limits. Unlike hypochlorite cleaning, percarbonate introduces no chloride or chloramine residue, but its carbonate release increases pH and can cause calcium carbonate precipitation in hard water unless polyacrylate or gluconate chelants are included. Published data for percarbonate performance on mixed cellulose ester ultrafiltration membranes is limited; such membranes are excluded from standard CIP recommendations unless the manufacturer confirms pH and oxidant compatibility.
| Soil/equipment | Concentration wt% | Temperature °C | Recirculation min | Critical control limit |
|---|---|---|---|---|
| Plate heat exchanger | 1.5–2.5 | 55–65 | 15–20 | Rinse pH below 8.0 before acid wash |
| Reverse-osmosis membrane | 0.5–1.0 | ≤45 | 20–30 | Oxidant exposure below membrane warranty limit |
| Open vessel/kettle | 1.0–2.0 | 50–60 | 20–30 | No aluminum fittings or unpassivated steel |
Exhaust bleaching of cellulosic knits in jet dyeing machines with liquor ratios of 8:1 to 12:1 can use sodium percarbonate as a solid hydrogen peroxide donor when liquid peroxide storage is restricted by site safety. The percarbonate is added at 2.5–6.0 g/L of bath, after the fabric is wetted and the bath has reached 50–60 °C; sodium silicate at 1–3 g/L or a phosphonate stabilizer is dosed separately to chelate transition metals. The bath is then raised to 80–95 °C and held for 30–60 min; the sodium carbonate released raises the bath pH to 10.3–11.0 and eliminates the need for caustic soda in some formulations. Continuous pad-batch bleaching on woven cotton shirting uses a pad liquor of 20–40 g/L sodium percarbonate at 70–80% wet pickup, with a dwell time of 12–24 h at room temperature; this process generates hydrogen peroxide in the wet fabric stack and requires batching rotation to prevent drainage streaks. Finished fabric types produced through this route include bleached cotton single jersey, interlock underwear fabric, woven sheeting, and oxygen-bleached toweling; the percarbonate route is less common where optical white standards require the higher active-oxygen control of liquid hydrogen peroxide dosing. Compliance is checked against GOTS Version 7.0 for organic textile processing, OEKO-TEX Standard 100 for finished article chemical residues, and the ZDHC MRSL for restricted halogenated bleaching agents. The main process limitation is non-uniform decomposition on hard water: when total hardness exceeds 50 mg/L as CaCO₃, unsequestered iron and copper can catalyze radical bubble formation and cause pinhole damage on the knit surface.
Denture cleanser effervescent granules and oxygen-generating household surface cleaning sachets represent the lowest-tolerance anhydrous segment for sodium percarbonate. In these formulations, the percarbonate is ground or screened to 100–400 µm and mixed with anhydrous citric acid, sodium bicarbonate, and a lubricant at 20–35 wt% sodium percarbonate in the granulate; the acid–base effervescence is deliberately paired with peroxide release to create a foam that lifts protein film from acrylic denture surfaces. Production is conducted in climate-controlled rooms below 30% relative humidity and at 18–22 °C; tableting is performed on rotary presses with pre-compression, and PVDC or desiccant-sealed packaging is used to maintain active oxygen loss below 3% per 12 months. Terminal packaged formats are denture cleansing tablets, retainer cleaning sachets, and oxygen-generating garbage-disposal or washing-machine cleaning tablets. Compliance for cosmetic or medical-device classifications follows Regulation (EC) No 648/2004 where the product is a cleaning preparation, and MDR classification must be verified when a denture cleanser is marketed with disinfection claims; for household cleaners, CLP classification and child-resistant closure requirements under the EU Detergent Packaging Regulation apply. Published accelerated aging data for all acrylic denture base resin combinations is limited; each polymer grade must be tested for surface crazing after repeated oxygen exposure before formulation lock.
Competitive Sodium Percarbonate prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8618963613625 or mail to sales10@ascent-petrochem.com.
We will respond to you as soon as possible.
Tel: +8618963613625
Email: sales10@ascent-petrochem.com
Flexible payment, competitive price, premium service - Inquire now!
Sodium percarbonate is the crystalline adduct of sodium carbonate and hydrogen peroxide with formula 2Na2CO3·3H2O2, CAS registry number 15630-89-4, and EC number 239-707-6. The theoretical active oxygen of the pure adduct is 15.3% by mass, while commercial grades are typically specified between 13.0% and 13.9% active oxygen because of manufacturing moisture and additive content. This corresponds to a hydrogen peroxide equivalent of approximately 27.5% to 29.5%. The product is supplied as white free-flowing granules or powders with product forms differentiated by coating chemistry and particle-size distribution rather than by a universal model numbering system. Principal commercial forms include uncoated fine powder, coated detergent granule, densified tablet grade, and coarse industrial grade. Bulk density ranges from 600 g/L to 1100 g/L, and median particle size ranges from 150 μm to 1200 μm. A 1% w/w solution typically exhibits pH 10.5 to 11.0. Sodium percarbonate is classified under CLP according to EC 1272/2008 as Ox. Sol. 3 H272, Acute Tox. 4 H302, Eye Dam. 1 H318, STOT SE 3 H335, and Aquatic Chronic 3 H412. Transport classification is UN 3378, Class 5.1, Packing Group III.
In phosphate-free heavy-duty powder detergents, sodium percarbonate functions as the primary oxygen bleach without introducing boron-containing residues. Sodium perborate monohydrate and tetrahydrate have historically been used in European powder detergents, but their effective oxygen release occurs at higher wash temperatures: perborate monohydrate typically requires 60°C to 80°C, while percarbonate releases active oxygen at 30°C to 60°C. This lower release threshold reduces the amount of tetraacetylethylenediamine activator needed for low-temperature cycles. Sodium hypochlorite differs in forming chlorinated organic by-products during cotton laundering, whereas percarbonate oxidation proceeds through perhydroxyl anion and is used in color-safe oxygen bleach systems. Residue chemistry also differs: sodium percarbonate decomposes to sodium carbonate, contributing alkalinity and builder capacity; sodium perborate leaves sodium borate, which is restricted in jurisdictions where boron compounds are classified as reprotoxic under EC 1272/2008. In dry blending, sodium percarbonate is frequently combined with coated enzyme granules because the alkalinity of released sodium carbonate can reduce protease stability if free moisture is present in the mix.
| Property | Sodium percarbonate | Sodium perborate monohydrate | Sodium perborate tetrahydrate | Sodium hypochlorite solution |
|---|---|---|---|---|
| Active oxygen or chlorine | 13.0–13.9% | 15.5–16.5% | 10.0–10.5% | 10% available chlorine |
| Effective washing window | 30–60°C | 60–80°C unless TAED activated | 70–90°C unless TAED activated | 20–40°C |
| Residue | Sodium carbonate | Sodium borate | Sodium borate | Sodium chloride/chlorate |
| By-product profile | No chlorinated organic by-products | No chlorinated organic by-products | No chlorinated organic by-products | Chlorinated by-products possible |
Moisture sensitivity is the principal limitation of uncoated sodium percarbonate. Coated granules are produced by fluidised-bed coating with sodium sulfate, sodium carbonate, sodium silicate, or organic polymer films to delay moisture ingress and reduce caking in bulk storage. The coating thickness is adjusted to preserve acceptable dissolution at 20°C; coated material may retain more un-dissolved residue after 5 min than uncoated powder, but the exact lag time depends on coating formulation and agitation intensity. Industrial purchasers specify active oxygen by titration, particle-size distribution by sieve analysis, bulk density, moisture, and heavy-metal content. The industrial standard HG/T 2764-2013 provides test methods for active oxygen, moisture, bulk density, and particle size; suppliers may also report data under ISO 9001 quality management documentation. Table 2 lists specification ranges for four common product forms.
| Parameter | Uncoated fine powder | Coated detergent grade | Densified tablet grade | Coarse industrial grade |
|---|---|---|---|---|
| Active oxygen wt% | 13.0–13.5 | 13.2–13.8 | 13.0–13.5 | 13.3–13.8 |
| Bulk density g/L | 600–800 | 700–900 | 900–1100 | 700–950 |
| Median particle size μm | 150–400 | 500–900 | 700–1200 | 300–700 |
| Moisture wt% max | 1.0 | 0.8 | 0.5 | 0.8 |
| pH 1% solution | 10.3–10.8 | 10.5–11.0 | 10.4–10.9 | 10.5–10.8 |
Automatic dishwashing tablet formulations expose sodium percarbonate to a process conflict between tablet hardness and disintegration time. Densified tablet grades with median particle size above 700 μm and bulk density above 900 g/L are preferred for uniform die filling during rotary tablet compression. In phosphate-free formulations, sodium percarbonate levels commonly range from 30 wt% to 50 wt%; as the fraction increases, tablet hardness for a fixed compression force rises, but disintegration time in 45°C water can exceed 300 s unless disintegrant content is increased. On rotary presses with 25-station turrets, compression force is typically held between 15 kN and 40 kN; tablet hardness of 80 N to 140 N is often sufficient for packaging, but disintegration in 45°C water should remain below 300 s for acceptance in European automatic dishwashing machines. Published data for specific rotary press configurations is limited, and empirical optimization is required for each tooling set and formulation. At 20°C, sodium percarbonate solubility is approximately 140 g/L; dissolution rate depends on granule size, surface coating, agitation rate, and bath pH. Under use conditions, the carbonate released from percarbonate supplements builder alkalinity, while hydrogen peroxide oxidizes tea and coffee deposits on ceramic and stainless steel dishes. Manganese or silver catalysts are sometimes incorporated to accelerate low-temperature bleach activity.
Storage stability of sodium percarbonate is governed by moisture availability, temperature, and trace transition-metal contamination. At relative humidity above 60%, uncoated sodium percarbonate adsorbs moisture and decomposes exothermically; bulk storage should therefore be maintained below 40°C and 60% RH in sealed silos or lined packaging. Trace iron, copper, and manganese ions catalyze hydrogen peroxide decomposition, so commercial grades may include silicate or phosphonate stabilizers to limit catalytic loss. Packaging typically consists of multiwall paper sacks with polyethylene inner liners or 500 kg flexible intermediate bulk containers with moisture barriers. The product should not be stored adjacent to acids, reducing agents, ammonium salts, or strong alkalis; spills should be collected in dry containers and not mixed with combustible materials. Under REACH, the substance is registered for detergent, cleaning, and technical applications, and the safety data sheet identifies the oxidizing solid classification and conditions for safe storage. Thermogravimetric analysis of dry sodium percarbonate shows peroxide-related mass loss above approximately 60°C, making temperature-controlled warehousing necessary in hot climates.
In household laundering, sodium percarbonate removes polyphenolic stains through nucleophilic oxidation in the pH 10–11 wash liquor. At 40°C, coffee, tea, red wine, and berry stains are oxidatively decolorized; at 20–30°C, TAED activation produces peracetic acid in situ and improves efficacy. Color changes and fabric damage are evaluated according to textile test protocols such as ISO 105-C06 for colorfastness to domestic laundering and ASTM D5034 for breaking strength of textile fabrics. Sodium percarbonate causes less tensile loss than chlorine bleach in cotton fabrics when used at recommended doses, though prolonged contact at high pH with silk, wool, and polyamide is not recommended because oxidative damage may occur. The carbonate residue from decomposition may increase hardness precipitation in cotton fibers when wash water hardness exceeds 300 mg/L as CaCO3; a sequestrant or ion-exchange softener is required under such conditions.
In open plant cleaning and industrial disinfection, sodium percarbonate is dissolved at 0.5% to 2.0% w/w in warm water at 40–60°C to remove protein, fat, and beer stone. It is used in clean-in-place circuits for stainless steel tanks, filling lines, and membrane systems because it leaves no chlorinated residue and produces low-foam solutions. The alkaline pH and carbonate buffer can attack soft metals; 316L stainless steel, polypropylene, PVDF, and EPDM are generally compatible, whereas brass, copper, aluminum, carbon steel, and polyacetal are not recommended. In recirculating cooling water, periodic shock dosing of sodium percarbonate can reduce heterotrophic biofilm counts, but carbonate precipitation on heat-exchange surfaces may occur when calcium hardness exceeds 300 mg/L as CaCO3. The hydrogen peroxide decomposition to water and oxygen leaves sodium carbonate as the only solid residue, which can be rinsed or neutralized with dilute acid.