Acetylacetone Peroxide

Acetylacetone Peroxide

    VTB
    Specifications
    HS Code 751918
    Product Name Acetylacetone Peroxide
    Synonyms 2,4-Pentanedione peroxide; Peroxyacetylacetone; AAP
    Cas Registry Number 37187-22-7
    Einecs Number 253-384-9
    Molecular Formula C5H8O4
    Molecular Weight 132.11 g/mol
    Physical State Liquid
    Appearance Clear yellow liquid
    Odor Pungent
    Density 1.15 g/cm3 at 20 °C
    Boiling Point 220.1 °C at 760 mmHg
    Flash Point 87.6 °C
    Solubility Soluble in organic solvents; slightly soluble in water
    Chemical Family Organic peroxide
    Hazard Class 5.2 (Organic peroxide)
    Un Number 3105
    Storage Conditions Keep refrigerated, away from heat, sparks, flames, acids, bases, and reducing agents
    Usage Polymerization initiator; curing agent for unsaturated polyester resins
    Stability Unstable; decomposes on heating; sensitive to shock, friction, and heat
    Oxidizing Properties Strong oxidizing agent
    Toxicological Hazard Harmful if swallowed; irritating to skin, eyes, and respiratory tract

    As an accredited Acetylacetone Peroxide factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.

    Packing & Storage
    Packing Acetylacetone Peroxide is packaged in 500 g UN-approved, vented polyethylene containers with organic peroxide hazard labels and temperature-control markings.
    Container Loading (20′ FCL) Load in 20′ FCL as a regulated organic peroxide; IMDG-compliant, ventilated, segregated, labeled, placarded, secured, and temperature-controlled if required.
    Shipping Acetylacetone peroxide is shipped as a regulated organic peroxide, Class 5.2, typically UN 3105 or UN 3107 depending on formulation. Use approved packaging, temperature control if specified, compatible cushioning, and correct labels/placards. Follow IMDG, IATA, ADR, and SDS rules; segregate from incompatible materials and use trained handlers.
    Storage Store Acetylacetone Peroxide in a cool, dry, well-ventilated, approved, dedicated, fire-resistant area away from heat, sparks, flames, and direct sunlight. Keep in its original, properly labeled container, upright and closed, with secondary containment. Segregate from acids, bases, reducing agents, metals, combustibles, and other peroxides. Maintain recommended temperature; avoid shock, friction, and impact. Use explosion-proof equipment and follow local regulations.
    Shelf Life Store refrigerated; shelf life approximately 6 months at 20°C or 12 months at 5°C; protect from heat, light, and contamination.
    Application of Acetylacetone Peroxide

    Cure Behaviour in Ambient-Cure Unsaturated Polyester Laminating Resins

    Room-temperature crosslinking of pre-accelerated orthophthalic unsaturated polyester resin proceeds by cobalt-promoted decomposition of acetylacetone peroxide. The initiator is normally dosed at 1.0–2.0 phr by mass of resin. The lower portion of the range is reserved for laminates exceeding 6 mm thickness. The upper portion is used for thin spray-up skins cured below 18°C. Mixing order is critical. The peroxide must be dispersed into the resin after the cobalt pre-accelerator has been incorporated by the resin producer. Direct pre-mixing of cobalt and peroxide is a fire and explosion hazard. On production-scale hand lay-up, gel time measured by cup method at 25°C typically shortens from approximately 25 min at 1.0 phr to below 10 min at 2.0 phr. Resin acid number, styrene content, and inhibitor level shift this response. Laminates built from 450 g/m² chopped strand mat and 600 g/m² woven roving are consolidated with serrated rollers to a glass content of 28–35 wt%. Exotherm is the controlling process risk. In a 10 mm flat panel, the internal peak temperature may exceed 120°C because of low thermal conductivity. That causes intra-laminate shrinkage strain and microcracking if the peroxide is not reduced. Compliance testing for terminals such as boat hulls, storage tank shells, and industrial panels follows ISO 527-4:1997 for tensile properties, ISO 14125:1998 for flexural properties, and ISO 75-2:2013 for heat deflection temperature. Barcol hardness of post-cured laminate should be verified with ASTM D2583-13a. Values below 35 Barcol after 24 h at 23°C commonly indicate under-dosing, poor mixing, or resin styrene loss.

    Why Does Pot Life Drop Abruptly Beyond 2.0 phr in Vinyl Ester Infusion?

    Vacuum infusion of bisphenol-A epoxy vinyl ester resin demands a different initiator response than open-mould laminating. Resin residence time in the pot and feed lines can exceed 45 min before injection is complete. When acetylacetone peroxide is used in this process, the practical loading window is generally 1.2–2.5 phr based on resin mass. The upper boundary is not governed solely by final cure. Cumulative heat generation in a partially filled and resin-rich infusion network raises the temperature of the resin volume. Because decomposition of the peroxide follows Arrhenius behaviour, a temperature increase of 10°C can reduce the gel time by roughly half in production batches. As the dosage exceeds 2.0 phr, the resin can gel inside the feed manifold or distribution mesh before the component is fully saturated. This occurs particularly when the tool surface is preheated above 30°C to reduce viscosity. The resulting dry-spot rejection is a well-documented manufacturing failure in GRP ducting, scrubbers, and corrosion-resistant storage tanks built to BS EN 13121-3:2016. Loadings below 1.2 phr with a weak cobalt promoter give low crosslink density. This appears later as reduced flexural strength and poor corrosion resistance. Chemical resistance of cured vinyl ester laminates is assessed by ASTM C581-15. Tensile and HDT data are obtained to ISO 527-2:2012 and ISO 75-2:2013. Post-cure is usually specified at 80°C for 4 h to complete residual styrene conversion and raise HDT above 100°C for process equipment. Operators must also limit water contamination in the resin. Free moisture hydrolyses the peroxide and accelerates phase separation in the feed drum, causing flow-starved areas in the laminate.

    DesignationProperty / ScopeRelevant Application
    ASTM D638-14Tensile properties of unreinforced and reinforced plasticsCast resin, laminates, putties
    ISO 527-2:2012Tension test for moulding and extrusion materialsCrosslinked resin matrices
    ISO 14125:1998Flexural properties of fibre-reinforced plastic compositesFRP laminates
    ASTM D2583-13aBarcol hardness of rigid plasticsAmbient-cure and post-cured laminates
    ISO 75-2:2013Heat deflection temperature under flexural loadVinyl ester process equipment
    ASTM C581-15Chemical resistance of thermosetting resins used in FRP structuresStorage tanks, ducts, scrubbers
    BS EN 13121-3:2016GRP tanks and vessels: design and workmanshipCorrosion-resistant tanks
    EAD 330232-01-0601Post-installed mechanical fasteners in concreteChemical anchoring formulations

    In marine and sanitary gelcoat production, acetylacetone peroxide controls the cure of a thin, unreinforced barrier layer before lamination begins. The gelcoat is typically spray-applied at 0.4–0.6 mm wet film thickness using a cup gun or airless unit. The peroxide is set at 1.0–2.0 phr on resin weight. The lower half of that range is preferred for dark colours because carbon black and iron-oxide pigments absorb heat during cure and accelerate exotherm. After application, the surface is allowed to reach the tack-free state, usually between 45 min and 120 min at 20°C, before the structural laminate is applied. The secondary bond window is normally open for 24 h. Beyond that, airborne contaminants and styrene evaporation reduce adhesion of the subsequent laminate. A critical production defect is premature lamination over a soft gelcoat. Under-cured gelcoat is displaced by roller pressure, producing fibre print-through and loss of surface gloss. An over-cured gelcoat with high crosslink density may exhibit insufficient monomer diffusion into the adjacent laminating resin, lowering the interfacial bond. Hardness is measured with ASTM D2240-15(2021) Shore D. Typical specification for demoulded gelcoat is not less than Shore D 70 after 24 h. Weathering resistance of pigmented gelcoats is tested under ISO 4892-2:2013 fluorescent UV or xenon arc conditions. Gloss retention is evaluated to ASTM D523-14. Terminal parts include boat hulls, shower trays, and acrylic-faced sanitary ware.

    When High-Filler Repair Putties Require Controlled Exotherm and Low Slump

    When high-filler repair putties require controlled exotherm and low slump, the peroxide loading must be scaled to resin content rather than total compound mass. Automotive and industrial repair putties compound acetylacetone peroxide into unsaturated polyester resin pastes containing talc, calcium carbonate, or fumed silica. In a paste with 50–65 wt% total filler, the dosage commonly lies between 2.0–4.0 phr of resin. This range is higher than unfilled laminating formulations because the filler surface area adsorbs a portion of the free-radical flux. The mineral filler also acts as a heat sink, lowering the exotherm peak. The process conflict is slump control versus cure speed. Low filler loading improves spreadability but increases sag on vertical panels. High filler loading controls sag but reduces pot life and makes uniform peroxide dispersion difficult in short manual mixing. Production mixing uses slow planetary mixers with vacuum deaeration. Trapped air must be removed before peroxide addition to avoid porosity. The filled paste must not incorporate amines or transition metal driers that are not specifically formulated for ketone peroxide systems. Uncontrolled acceleration can produce immediate decomposition. Cured putty is sanded after 20–30 min depending on ambient temperature and then finished. Adhesion to metal substrates is checked by ASTM D4541-17 pull-off testing after full cure. Flexural properties may be compared to ISO 178:2019. Because filler type and moisture content vary by supplier, published data for this specific filled configuration is limited. Plant trials are required to set the final ratio. Terminal articles are repair compounds for automotive body panels, industrial sheet metal, and castings.

    Cast Marble and Solid Surface Cure Cycles

    Acetylacetone peroxide initiates room-temperature polymerisation of filled casting resins used for imitation marble, onyx, and solid-surface sheet. A representative open mould casting formula contains 55–70 wt% alumina trihydrate dispersed in unsaturated polyester resin. The peroxide loading is typically 1.0–2.0 phr of resin when the mould is held at 20–25°C. Alumina trihydrate plays a dual role. It reduces flammability and extracts exothermic energy from the polymerising mass. This allows the use of the upper peroxide level without excessive thermal stress. The batch is vacuum-mixed to remove entrained air, poured into a mould, and vibrated at low frequency to consolidate the fill and release bubbles before gelation. Gel time must be long enough for the entire mould volume to be filled. A slow cure below 16°C can produce incomplete cure at the mould faces and a tacky rear surface. After demoulding, post-cure is often performed at 60°C for 2 h to stabilise dimensional response and raise hardness. Shrinkage is a primary quality issue. The cured part should show uniform density and no sink marks at rib intersections. Density is verified by immersion or displacement methods based on ISO 2781:2018. Hardness and thermal resistance are specified using ASTM D2240-15(2021) Shore D and ISO 75-2:2013 HDT. Terminal products are vanity tops, basins, bathtubs, and solid-surface furniture components.

    Chemical anchoring cartridges that rely on unsaturated polyester or vinyl ester base resins employ acetylacetone peroxide as the curing agent in the separate hardener stream. In static-mix systems, the resin and peroxide paste are combined at a fixed volume ratio, commonly 10:1, inside a spiral mixer element and injected into a drilled hole. The working time requirement varies with base material temperature. At 20°C the mixed resin must remain injectable for at least 4–6 min. At 30°C the working time may fall below 2 min. Full-load approval is not granted immediately after gelation. Load transfer to the threaded rod or reinforcing bar requires the resin to reach a specified degree of crosslinking, often after 30–60 min at 20°C. Base material temperature below 5°C is generally outside the approved service envelope for these formulations. Cure rate becomes too slow and condensation moisture can interfere with adhesion to the borehole wall. Installation performance is tested under EAD 330232-01-0601 for post-installed fasteners in concrete, including fire resistance and sustained load. Pull-out capacities are determined by EN 1992-4:2018 or national adaptation. Accelerated ageing follows the exposure conditions of the relevant European Assessment Document. Applications are structural connections, balustrade anchors, façade brackets, and rebar connections in concrete repair.

    Free Quote

    Competitive Acetylacetone Peroxide prices that fit your budget—flexible terms and customized quotes for every order.

    For samples, pricing, or more information, please contact us at +8618963613625 or mail to sales10@ascent-petrochem.com.

    We will respond to you as soon as possible.

    Tel: +8618963613625

    Email: sales10@ascent-petrochem.com

    Inquiry

    Get Free Quote of Ascent Petrochem Holdings Co., Limited

    Flexible payment, competitive price, premium service - Inquire now!

    Certification & Compliance
    More Introduction

    Acetylacetone peroxide (CAS 37187-22-7) is a phlegmatized organic peroxide used as a low-temperature radical initiator for unsaturated polyester and vinyl ester resins. Commercial material is supplied as a solution in dimethyl phthalate; a representative industrial grade contains 50 wt% peroxide and exhibits an active oxygen content in the range 4.4–4.7% w/w by supplier iodometric titration. The peroxide initiates styrene–polyester copolymerization after activation by cobalt carboxylate accelerators, with radical generation at ambient mould temperatures below 40 °C. This mechanism differs from thermal initiators because decomposition rate is governed by redox reactions with the cobalt promoter rather than by mould temperature alone. Active oxygen is therefore used as the release specification instead of chemical purity, since commercial organic peroxide solutions contain multiple peroxide species and are not isolated as a single crystalline compound.

    Product Identity and Commercial Specifications

    Commercial data sheets for the 50% dimethyl phthalate solution specify a pale-yellow liquid with density at 20 °C in the range 1.16–1.19 g/cm³ and dynamic viscosity in the range 18–25 mPa·s. Active oxygen is the primary release specification because it defines radical yield per unit mass; a shift of 0.1–0.2% active oxygen can alter gel time in a production resin enough to disturb demoulding schedules. Transfer piping and metering pumps constructed from stainless steel type 316L or glass-reinforced plastic are used. Carbon steel, copper, and brass are incompatible because transition metal ions accelerate peroxide decomposition and may generate heat. The product is normally packaged in 25 kg high-density polyethylene jerricans or composite intermediate bulk containers with a polyethylene liner.

    PropertyTypical range for 50% dimethyl phthalate solutionReference method
    Active oxygen4.4–4.7% w/wSupplier iodometric titration
    Density at 20 °C1.16–1.19 g/cm³ASTM D4052
    Dynamic viscosity at 20 °C18–25 mPa·sISO 3219
    PhlegmatizerDimethyl phthalateSupplier certificate of analysis
    Storage temperature≤ 30 °CSDS storage condition

    The dimethyl phthalate phlegmatizer is not chemically inert in the cured article. It remains in the matrix as a plasticizer and can influence flexural modulus and glass transition temperature; formulations requiring specific flexural properties should be checked against ISO 178 on the finished laminate. In open-mould laminates, the plasticizer content can slightly reduce surface hardness at high peroxide addition levels, but the more immediate process effect is viscosity reduction before gelation.

    What Distinguishes Acetylacetone Peroxide from Methyl Ethyl Ketone Peroxide in Unsaturated Polyester Cure?

    Methyl ethyl ketone peroxide is the benchmark initiator for cobalt-promoted room-temperature cure. Acetylacetone peroxide differs in active oxygen content, radical flux, and volatile decomposition products. A conventional MEKP solution is commonly supplied at approximately 9% active oxygen, while the acetylacetone peroxide solution described here is supplied at approximately 4.5% active oxygen. Gel time must be compared by ISO 2535 on the production resin because accelerator level, inhibitor concentration, styrene content, and filler surface chemistry all shift the response. Published data for heavily filled, flame-retarded, and highly thixotropic systems are limited. In cobalt pre-promoted resins at 0.3 phr cobalt 6% solution, a starting point is often an AAP dose of 1.5–2.0 times the MEKP dose to obtain a similar gel time at 20 °C; this ratio is not a specification and must be adjusted after gel-time testing on the actual production batch.

    Decomposition products of acetylacetone peroxide include acetylacetone-derived species, carbon dioxide, and trace acetic acid under resin cure conditions. Methyl ethyl ketone peroxide decomposition under equivalent conditions generates methyl ethyl ketone and water as volatile products. On gel coat spray lines running air-assisted or airless guns at 60–100 bar, the lower ketone evolution can reduce air entrapment and monomer boil at wet film thicknesses of 0.4–0.8 mm. However, switching from MEKP to AAP without adjusting the cobalt accelerator concentration can produce under-cure. The failure mode is typically surface tack and Barcol hardness below 35 on ASTM D2583 after 24 h at 23 °C. Production-scale failures of this type are more common in shops below 18 °C, where cobalt/potassium activation is slowed.

    Compared with dibenzoyl peroxide, acetylacetone peroxide does not require amine acceleration and does not produce benzoic acid residues that can deposit as white bloom on mould surfaces. This makes it a candidate for cobalt-promoted gel coat and laminating systems where mould fouling from benzoic acid is a recorded maintenance problem. However, AAP is not a replacement for dibenzoyl peroxide in amine-cured acrylic resins or in polyester systems formulated without cobalt soaps, because the cobalt accelerator is required for radical generation at shop-floor temperatures. In casting applications, the lower exotherm reduces thermal stress, but cure time to demould can be extended substantially relative to MEKP in the same resin at 20 °C; published comparative data for this specific extension are limited and should be generated on the production mould.

    When Thick-Section Laminates Require Low Exotherm Initiation

    Acetylacetone peroxide is evaluated for cast sections and laminates above 10 mm when peak exotherm is the controlling process limit. In a 20 mm glass-reinforced unsaturated polyester laminate, the lower radical flux reduces core temperature rise compared with MEKP at equal gelation response. The effect is rate-related rather than a reduction in total reaction enthalpy: the peroxide does not reduce the resin exotherm per gram, but it spreads heat release over a longer period and allows more heat to dissipate from the laminate surface. Published comparative data for specific resins are limited, and plant trials typically embed type K thermocouples at the midplane to record the temperature rise before demoulding. The trade-off is a narrower processing window. Below 18 °C, conversion can plateau before through-cure, leaving residual styrene detectable by headspace gas chromatography. For structural parts, post-cure at 40–60 °C for 2–4 h is often specified only after differential scanning calorimetry shows residual exotherm; fixed post-cure schedules without thermal analysis can fail to complete cure in thick castings because the low initial exotherm produces less internal heat to drive vitrification through the core.

    In filled systems containing alumina trihydrate or calcium carbonate at 50–70 phr, gel time is longer than in unfilled resin because filler surfaces adsorb cobalt accelerator and increase compound heat capacity. Unfilled resin gel time data must not be used for filled laminates. Gel time should be measured on the actual compound by ISO 2535 or a temperature-compensated gel timer. The lower exotherm of AAP is partially masked in highly filled castings because the filler acts as a heat sink; thick castings can still develop stored heat if stacked or insulated before cooling.

    On open-mould laminating lines, AAP is used in gel coats and barrier coats where low exotherm helps preserve the surface profile of closed-mould parts. Airless gel coat spray equipment operating above 60 bar must be flushed immediately after use because the peroxide solution can separate from the resin and form localized high-peroxide zones if allowed to remain in static mixers. Batch-to-batch variance in peroxide active oxygen of 0.1–0.2% w/w can move gel time by several minutes in a pre-promoted resin; therefore plants with multiple peroxide deliveries titrate incoming material and store it at or below 30 °C before first use. The dimethyl phthalate phlegmatizer changes gel coat viscosity and sag behaviour; a Brookfield viscometer at 25 °C is used to verify that spray viscosity remains within the supplier’s specified range after peroxide addition.

    Verifying Cure Completion in Production Laminates

    Production cure control for AAP-initiated laminates requires a part-specific hardness relationship because the lower exotherm delays through-cure relative to surface cure. Barcol hardness is measured with ASTM D2583. The minimum value for demoulding should be established from tensile or flexural data on the same laminate construction. A practical protocol includes surface Barcol hardness after 24 h at 23 °C, midplane temperature recording with type K thermocouples, and residual styrene by gas chromatography for parts that must meet low-emission interior air requirements. If the surface is hard but the core remains soft, the laminate is under-cured; this condition is more common with AAP than with MEKP when moulds are below 18 °C. In such cases, post-cure at 40–60 °C for 2–4 h may be necessary, but the duration should be adjusted by residual exotherm measurement using differential scanning calorimetry per ISO 11357-1 rather than a fixed cycle. Residual styrene above 0.1% in a finished laminate indicates incomplete conversion and may require post-cure or reformulation with lower styrene content.

    Storage, Transport Classification, and Spill Containment Protocol

    Because acetylacetone peroxide is an organic peroxide, storage and handling follow the hazard class rules for reactive materials. The 50% solution in dimethyl phthalate is typically classified for transport as UN 3105, organic peroxide type D, liquid, but the specific proper shipping name and packaging instruction must be confirmed on the supplier’s safety data sheet. Storage is normally specified at ≤ 30 °C, with maximum temperature excursions below 40 °C; the self-accelerating decomposition temperature of the phlegmatized solution is reported near 60 °C, requiring temperature-controlled storage in hot climates. Separation from cobalt accelerators is mandatory outside the mixing head because concentrated peroxide and accelerator can react violently. Spill response uses water-dampened inert absorbent; contaminated material is placed in vented containers with water and segregated as reactive waste. Peroxide-soaked rags must not be allowed to dry in closed drums, because evaporation can create a shock-sensitive residue.

    Regulatory documentation for this product requires verification of supplier SDS Section 15 and local occupational exposure limits for dimethyl phthalate. For cured articles intended for food-contact or toy applications, compliance with EU 10/2011 or FDA 21 CFR 177.2420 is not established by resin selection alone; migration testing must be performed on the finished article. Waste streams containing acetylacetone peroxide or its reaction products are managed as hazardous waste under local organic peroxide controls, and ventilation for spray booths and laminating areas should be designed for styrene and phthalate volatiles in accordance with national occupational hygiene regulations.

    Top